Specifications

Reference Manual
MHM-97408, Rev. 2
June 2008
CSI 9420
2-4
1. Set the wirelesss Network ID
2. Set the wireless network Join key
3. Specify the TAG and Device Description if desired
4. Specify the type of sensor(s) installed
5. Specify the measurements to be mapped to the standard HART
variables: PV, SV, TV, and QV.
6. Enter the “Sensor Sensitivity” for the installed accelerometer(s)
7. Set the alert threshold
8. Specify the update rate.
The specific user interface (UI) available for performing this configuration
varies depending on the host that is used.