Product data
www.assetweb.com4
Machinery Health
™
Management October 2014
Best-in-Class Security
Emerson’s multi-layered approach to wireless network
security builds on the IEC 62591 standard to ensure that
your data stays protected – no matter what. Authentication
and verication make certain that only authorized devices
can join the network, while 128-bit encryption shields your
information. Channel hopping maintains operation, even in
challenging environments.
Emerson’s Complete Smart Wireless Solution
Emerson has a complete portfolio of Smart Wireless
transmitters for many applications, including temperature,
pressure, ow, and level. In addition, the Smart Wireless THUM
™
Adapter can enable any HART device to wirelessly transmit
measurement and diagnostic information. Emerson wireless
devices can be accessed and maintained remotely using the
same tools and software as wired devices, leveraging existing
practices, training, and maintenance procedures.
Seamless Integration to Host Systems
Easily congure and broadcast measurements to Emerson’s
DeltaV
™
and Ovation
™
digital automation systems; use Ethernet
IP
™
to connect to Allen-Bradley
®
controllers; or apply Modbus
or OPC to report data back to most other automation systems
and/or data historians.
Analyze Data in AMS Machinery Manager
Vibration data from the CSI 9420 can be stored and analyzed
in AMS Machinery Manager. The Data Import module provides
easy data mapping using simple drag-and-drop commands.
AMS Machinery Manager combines predictive techniques with
comprehensive analysis tools for an accurate assessment of the
machinery health in your facility.
Detailed Reliability Data
Overall vibration indicates when a machine is running rough,
while the level of impacting detected by PeakVue signal
processing provides the operator with an indication about
the presence and severity of a serious defect such as under-
lubrication, bearing faults, gear defects, and pump cavitation.
Furthermore, once a machine has been agged, detailed data
can be analyzed by a vibration specialist to verify the exact
nature of the fault. With the advanced diagnostics in the
CSI 9420, you have easy access to all of this critical information.
High Resolution Waveform
The vibration waveform (shown below) is the basis for all
other vibration measurements performed by the CSI 9420.
Each waveform is a complex data set of thousands of samples,
collected over several seconds of machine operation.
While the acceleration waveform can be helpful in some
applications, the PeakVue waveform is indispensable for
diagnosing developing bearing and gear defects. Because of
their large size, however, waveforms tend to be collected less
frequently. Emerson’s Smart Wireless solution employs several
data compression techniques to extract the information while
facilitating easier transmission over the network.
At the heart of Emerson’s Smart Wireless solution is the self-
organizing network, featuring tight security, innite congurability,
and data reliability that rivals wired systems.
The acceleration waveform contains raw vibration data that allows
you to diagnose the health of the asset.