Product data

www.assetweb.com2
Machinery Health
™
Management October 2014
Overall Condition in the Control Room
The CSI 9420 delivers information about the overall health of
rotating assets directly to the control room via Modbus or OPC.
Overall vibration data is a good indicator of shaft problems
such as imbalance, misalignment, or mechanical looseness.
In contrast, the PeakVue reading provides a reliable measure
of impacting on the machine. As the PeakVue level increases,
it provides direct indication of a developing problem, such as
improper lubrication, bearing fault, or gear defect. Process
induced faults, such as pump cavitation, are detected by an
increase in both the overall vibration and PeakVue readings.
Asset Dashboard at your Fingertips
AMS Device Manager generates an asset dashboard based on
the output of the CSI 9420. This intuitive interface displays the
health of the sensor, the transmitter, and the production asset
being monitored – extending the benets of PlantWeb
®
to
WirelessHART devices.
Diagnostic Data to the Maintenance Office
AMS Machinery Manager automatically communicates detailed
diagnostic data to the maintenance ofce, including overall
values, energy bands, high resolution spectra, and waveforms.
Once stored in the AMS Machinery Manager database, these
measurements deliver the same diagnostic value as comparable
readings collected using Emerson’s industry- leading CSI 2140
Machinery Health Analyzer.
AMS Machinery Manager provides advanced analytical tools
to trend vibration levels, generate alerts, and diagnose
developing faults.
Information Available When You Need It
There are now three ways to collect high-resolution spectra
or waveforms:
1) Time-based: Collect readings automatically on a scheduled
basis, i.e. once every two weeks.
2) On-alert: Collect readings automatically whenever an alert
is registered based on either the overall vibration or the
PeakVue impacting.
3) On-demand: Manually initiate a reading at any point when
current diagnostic data is required.
This allows you to quickly and easily access current health
information about your rotating assets without leaving
your desk.
AMS Device Manager uses EDDL technology to create an asset
dashboard with clear indication of device and asset status.
Requires AMS Machinery Manager version 5.61 or higher
AMS Machinery Manager provides advanced analytical tools
to trend vibration levels, generate alerts, and diagnose
developing faults.