Data Sheet
Bulletin 71.1:CS400
6
Table 8. Type CS404 Regulator and Slam-shut OPSO and UPSO Pressure Ranges
REGULATOR SLAM-SHUT DEVICE
T
S
(1)
R
S
(1)
R
S
CS404
0.51 / 35
0.36 to 0.51 /
25 to 35
1.1 / 75
0.73 to 1.9 /
50 to 130
GF02168X012
0.32 / 22
0.14 to 1.1 /
10 to 75
T14169T0012 0.65 / 45
0.45 to 0.7 /
30 to 48
1.4 / 95 0.4 / 30
0.72 / 50
0.65 to 1 /
45 to 69
1.6 / 110
1.4 to 3.9 /
95 to 270
GF02169X012 0.4 / 30
1 / 69 2.5 / 172
2.2 to 5.5 /
150 to 380
GF02170X012
0.58 / 40
0.36 to 2.3 /
25 to 160
T14170T0012
1.5 / 103
1 to 2 psig /
69 to 138
3.0 / 207 0.73 / 50
2 / 138 3.5 / 241 1 / 69
3 / 207
2 to 5.5 psig /
138 to 380
6.3 / 434
3.8 to 8.7 /
260 to 600
GF02171X012
1.75 / 121
1.5 to 7.3 /
100 to 500
FA142869X12
4 / 276 7.3 / 503 2 / 140
5 / 345 8.3 / 572
5.8 to 16 /
400 to 1100
GF02172X012
2.9 / 200
5.5 / 380 8.8 / 606 3.6 / 250
1. For Types CS404IT and CS404ET equipped with Token Relief, if Non-Factory slam-shut OPSO setpoints are specied, they must not encroach on the Token Relief Start-to-Discharge
values provided in Table 4.
Table 7. Type CS404 Regulator and Slam-Shut OPSO Pressure Ranges
REGULATOR
SLAM-SHUT DEVICE
O
T
S
(1)
CS404
4 / 10 3.5 to 5 / 9 to 12 18 / 45
12 to 25 /
30 to 60
GF02168X0125 / 12 4.5 to 6.5 / 11 to 16 19 / 47
7 / 17 6 to 8 / 15 to 20 21 / 52
11 / 27 7.5 to 11 / 19 to 27 0.9 psig / 62
0.58 to 1.6 psig /
40 to 110
GF02169X012
14 / 35 10 to 14 / 25 to 35 1.1 psig / 75
0.65 psig / 45
0.45 to 0.7 psig /
30 to 47
1.4 psig / 96
0.87 to 2.8 psig /
60 to 190
GF02170X012
0.72 psig / 50
0.65 to 1 psig /
45 to 69
1.6 psig / 112
1 psig / 69 2.5 psig / 172
1.4 to 4.1 psig /
95 to 280
GF02171X0121.5 psig / 103
1 to 2 psig /
69 to 138
3.0 psig / 207
2 psig / 138 3.5 psig / 241
3 psig / 207
2 to 5.5 psig /
138 to 380
6.3 psig / 434
3.2 to 11 psig /
220 to 760
GF02173X012
4 psig / 276 7.3 psig / 503
5 psig / 345 8.3 psig / 572
5.5 psig / 380 8.8 psig / 606
1. For Types CS404IT and CS404ET equipped with Token Relief, if Non-Factory slam-shut OPSO setpoints are specied, they must not encroach on the Token Relief Start-to-Discharge
values provided in Table 4.
Table 6. Type CS403 Regulator and Integral Monitor Outlet Pressure Ranges
PRIMARY REGULATOR INTEGRAL MONITOR
T
S
Color
(1)
Color
In. w.c. In. w.c.
CS403
4 10 GE30198X012 Red
14 35 GE30189X012 12 to 21 / 30 to 52 Blue 5 12 GE30195X012 Purple
7 17 GE30188X012 Gold
11 27 GE30189X012 Blue
21 52 GE30196X012 18 to 30 / 45 to 75 Green
14 35 GE30224X012 Unpainted
18 45 GE30196X012 Green 1 psig 69 GE30225X012 26 to 40 / 65 to 99 Orange
1 psig 69 GE30225X012 Orange 1.5 psig 103 GE30190X012 1.4 to 2.9 psig / 97 to 200 Black
2 psig 138 GE30190X012 Black 2.5 psig 172 GE30190X012 1.4 to 2.9 psig / 97 to 200 Black
3 psig 207 GE30197X012
Yellow
3.5 psig 241 GE35081X012 2.6 to 3.7 psig / 179 to 255 Purple
4 psig 276 GE30197X012 5 psig 345 GE30192X012 3.6 to 6 psig / 248 to 414 Dark Blue
5 psig 345 GE30197X012 6 psig 414 GE33121X012 5.1 to 7.5 psig / 352 to 517 Red
1. Integral Monitor setpoints shown represent the minimum setpoint difference between the Integral Monitor and the Primary regulator. Higher monitor setpoints can be chosen, e.g., for
a Primary regulator setpoint of 7 in. w.c. / 17 mbar, the Integral Monitor can also be set at 14, 21 in. w.c. / 35, 52 mbar, 1 psig / 69 mbar or higher.