Data Sheet

ManualsBrandsEmerson ManualsOtherCS400

Bulletin 71.1:CS400





See Figure 3



Pressure Rating

(1)

See Table 1

Inlet Pressures

(1)

 175 psig / 12.1 bar

 See Table 2



(1)

 25 psig / 1.7 bar

 5 psig / 0.34 bar

over set pressure

5.5 psig / 380 mbar

Outlet Pressure Ranges

(1)

3.5 in. w.c. to 5.5 psig / 9 to 380 mbar





See Table 4

See Figures 10 to 14 and

Tables 10, 13, 18, 23 and 28



= 67





See Tables 9, 11, 12, 14, 15, 16, 17, 19, 20, 21,

22, 24, 25, 26, 27, 29 through 43



See Tables 44 through 69



 

See Tables 70 and 71



See Table 2



See Table 2



(1)(2)



All Types: -4 to 150°F / -20 to 66°C



All Types: -20 to 150°F / -29 to 66°C



1 NPT



See Figures 15 and 16



3/4 NPT



1/4 NPT restricted to 0.054 in. / 1.37 mm

TM600 Series True-Monitor

™

(1)

Inlet Pressure Ratings

Maximum Operating: Up to 125 psig / 8.6 bar

Maximum Emergency: 175 psig / 12.1 bar

 

11 in. w.c. to 7.5 psig / 27 mbar to 0.52 bar



 290 psig / 20.0 bar



232 psig / 16.0 bar

Construction Materials

 

Body: Gray Cast Iron, Ductile Iron and Steel

Body O-ring: Nitrile (NBR)

Closing Cap: Aluminum

Adjusting Screw: Aluminum

Diaphragm Case and Spring Case: Aluminum

Diaphragm Plate: Zinc-plated Steel

Valve Stem: Aluminum

Orice: Aluminum

Pusher Post: Aluminum

Diaphragm and Disk: Nitrile (NBR)

Control Spring: Music Wire or Stainless steel

Relief Valve Spring: Stainless steel

Relief Valve Spring Retainer: Aluminum

Vent Screen: Stainless steel

Vent Retaining Ring: Zinc-plated steel

Lever Pin: Stainless steel

Spring Seat, Lever, Other Metal Parts: Steel

 

Diaphragm Case, Spring Case, Disk Housing,

Diaphragm Upper Retainer and

Valve Stem: Aluminum

Diaphragm Head: Zinc-plated steel

Diaphragm: Nitrile (NBR)

Disk holder and Disk Retainer: Brass

Disk/Seat Contact: Nitrile (NBR)

1. The pressure/temperature limits in this Bulletin or any applicable standard limitation should not be exceeded.

2. Product has passed Fisher

testing for lockup, relief start-to-discharge and reseal down to -40 degrees.

- continued -