Data Sheet

Bulletin 71.1:CP400
3
Specications
Available Congurations
Type CP400IN: Type CP400 with
INTERNAL pressure registration and
NON-RELIEVING construction
Type CP400IT: Type CP400 with INTERNAL
pressure registration and TOKEN relief
Type CP400EN: Type CP400 with
EXTERNAL pressure registration and
NON-RELIEVING construction
Type CP400ET: Type CP400 with EXTERNAL
pressure registration and with TOKEN relief
Type CP403IN: Type CP400IN with integral
TRUE-MONITOR™ Protection
Type CP403IT: Type CP400IT with integral
TRUE-MONITOR Protection
Type CP403EN: Type CP400EN with integral
TRUE-MONITOR Protection
Type CP403ET: Type CP400ET with integral
TRUE-MONITOR Protection
Type CP404IN: Type CP400IN with integral
Type VSX4 Slam-shut module
Type CP404IT: Type CP400IT with integral
Type VSX4 Slam-shut module
Type CP404EN: Type CP400EN with integral
TypeVSX4 Slam-shut module
Type CP404ET: Type CP400ET with integral
Type VSX4 Slam-shut module
See Table 1
Body Sizes, Material, End Connections and
Pressure Rating
(1)
See Table 2
Inlet Pressure Ratings
(1)
See Table 3
Maximum Outlet Pressures
(1)
See Table 4
Outlet Pressure Ranges
(1)
See Table 5
Token Relief Start-to-Discharge
See Table 11
Flow Capacities
Type CP400
See Tables 12 through 17, 20 through 25
Types CP403 and CP404
See Tables 18, 19, 26 and 27
Type CP400 for Pressure Factor Measurement
(PFM) Applications
See Tables 29 through 34
Temperature Capabilities
(1)(2)
-20 to 150°F / -29 to 66°C
Spring Case Vent and Body Orientation
See Figure 7
Construction Materials
CP400 Series Main Valve and Actuator
Body: Gray Cast Iron, Ductile Iron and Steel
Body O-ring: Nitrile (NBR)
Closing Cap: Aluminum
Adjusting Screw: Aluminum
Diaphragm Case, Spring Case, Diaphragm Plate
and Valve Stem: Aluminum
Diaphragm Plate: Steel
Orice: Aluminum
Pusher Post: Aluminum
Diaphragm and Disk: Nitrile (NBR)
Relief Valve Seat: Aluminum
Control Spring: Stainless steel
Relief Valve Stem: Aluminum
Diaphragm Retainer: Zinc-plated steel
Lever Pin: Stainless steel
Spring Seat: Aluminum
Lever: Steel
67CP Series Pressure Loading Regulator
Spring: Music wire or Stainless steel
Body: Aluminum
O-ring and Soft Seat: Nitrile (NBR)
Valve Stem: Aluminum
Valve Plug: Nitrile (NBR)
Diaphragm: Nitrile (NBR)
True-Monitor Actuator
Diaphragm Case, Spring Case, Upper Retainer,
Monitor Housing and Valve Stem: Aluminum
Diaphragm Plate, Middle Diaphragm Retainer and
Low Disk Retainer: Steel
Diaphragm and Disk: Nitrile (NBR)
Control Spring: Stainless steel
Disk Housing: Brass
Vent Screen: Stainless steel
Vent Screen Retainer: Stainless steel
Closing Cap: Aluminum
Adjusting Screw: Aluminum
Type VSX4 Slam-Shut Device
Diaphragm Case, Spring Case, Diaphragm Plate
and Valve Stem: Aluminum
Diaphragm and Disk: Nitrile (NBR)
Control Spring: Stainless steel
Vent Screen: Stainless steel
Vent Screen Retainer: Zinc-plated steel
Closing Cap: Aluminum
Adjusting Screw: Aluminum
1. The pressure/temperature limits in this Bulletin or any applicable standard limitation should not be exceeded.
2. Product has passed Fisher
®
testing for lockup, relief start-to-discharge and reseal down to -40 degrees.
- continued -