Bulletin 71.1:CP200 December 2013 CP200 Series Commercial / Industrial PressureLoaded Pressure Reducing Regulator Figure 1. CP200 Series Pressure Loaded Regulator Features and Benefits • Wide Range of NPT Body Sizes • Easy to Install and Maintain • Highly Configurable • Only Standard Tools Required for Pressure Adjustment and Orifice Removal • Fixed Factor / Pressure Factor Measurement (PFM) Accuracy Capabilities D103135X012 • Secondary Seat™ Protection www.fisherregulators.
Bulletin 71.1:CP200 TYPE 67CP PRESSURE LOAdINg REgULATOR CLOSINg SPRINg dIAPHRAgM HEAd dIAPHRAgM LEVER LOWER CASINg EXTERNAL CONTROL LINE PLUg (dO NOT REMOVE IF UNIT IS PRESSURIZEd) VALVE STEM ORIFICE VALVE dISK Figure 2. Typical CP200 Series Cut-away View Introduction The CP200 Series pressure loaded regulators have been engineered to fit a multitude of pressure reducing applications including commercial and industrial installations.
Bulletin 71.1:CP200 Specifications The Specifications section lists the specifications for the CP200 Series Regulators. The following information is stamped on the nameplate of CP200 Series: Type Number, Maximum Outlet Pressure, and Spring Range.
Bulletin 71.1:CP200 Table 1. Available Configurations TYPE NUMBER C P 2 OPTIONS 0 Overpressure Protection Module 0 Without Overpressure Protection Module 5 With Secondary Seat™ Protection 6 With Secondary Seat Protection with bleed to indicate Secondary Seat is functioning Pressure Registration I Internal Registration Relief N Non-Relief T Token Internal Relief Table 2.
Bulletin 71.1:CP200 CONTROL SPRING TYPE 67CP PRESSURE LOADING REGULATOR CLOSING SPRING DIAPHRAGM VALVE DISK ORIFICE VALVE STEM M1129 INLET PRESSURE PRESSURE RETAINING PLUG (DO NOT REMOVE) LEVER MAIN REGULATOR OUTLET PRESSURE ATMOSPHERIC PRESSURE LOADING PRESSURE Figure 3. Type CP200IN Pressure Loaded Pressure Reducing Regulator with Internal Registration Operational Schematic Principle of Operation Decreasing Downstream Demand Refer to Figure 3.
Bulletin 71.
Bulletin 71.1:CP200 Type CP205 with Secondary Seat™ Protection Refer to Figure 4. The Type CP205 provides Secondary Seat Protection. As downstream demand decreases and downstream pressure rises to the regulator pressure lock-up value, the regulator will lockup. If, however, damage has occurred to the primary disk, to the primary orifice’s seating surface, or debris has become lodged between the primary disk and primary orifice, the outlet pressure will continue to rise.
Bulletin 71.1:CP200 Table 4. Outlet Pressure Ranges OUTLET PRESSURE RANgE(1) psig bar 1 to 2 69 mbar to 0.14 bar PART NUMBER SPRINg COLOR GE30199X012 SPRINg WIRE dIAMETER SPRINg FREE LENgTH Inch mm Inch mm Yellow Stripe 0.078 2.0 1.35 34.3 2 to 5 0.14 to 0.34 GE27213X012 Orange Stripe 0.100 2.5 1.47 37.3 5 to 10 0.34 to 0.69 GE39890X012 Black Stripe 0.114 2.9 1.47 37.3 10 to 20 0.69 to 1.4 GE30200X012 Purple Stripe 0.137 3.5 1.42 36.1 1.
Bulletin 71.1:CP200 Table 6. CP200 Series Flow Capacities for 1 psig / 69 mbar Setpoint ACCURACY SETPOINT + / - 1% ABS SET RANGE 1 psig -0.16 psi 0.16 psi 1 to 2 psig 69 mbar -11 mbar 11 mbar 69 mbar to 0.14 bar Inlet Pressure psig 3 5 10 15 20 30 40 50 60 80 100 125 psig 3 5 10 15 20 30 40 50 60 80 100 125 bar 0.21 0.34 0.69 1.0 1.4 2.1 2.8 3.4 4.1 5.5 6.9 8.6 bar 0.21 0.34 0.69 1.0 1.4 2.1 2.8 3.4 4.1 5.5 6.9 8.
Bulletin 71.1:CP200 Table 7. CP200 Series Flow Capacities for 2 psig / 0.14 bar Setpoint ACCURACY SETPOINT + / - 1% ABS PART NUMBER / COLOR SET RANGE 2 psig -0.17 psi 0.17 psi 1 to 2 psig 0.14 bar -12 mbar 12 mbar 69 mbar to 0.14 bar GE30199X012 / Yellow Stripe CAPACITIES IN SCFH / Nm3/h OF 0.6 SPECIFIC GRAVITY NATURAL GAS Orifice Size, Inch / mm Inlet Pressure 1/8 / 3.2 3/16 / 4.8 1/4 / 6.4 SCFH Nm /h SCFH Nm /h 3 3 SCFH Nm /h SCFH 1/2 / 13 Nm /h 3 SCFH Nm3/h psig bar 5 0.
Bulletin 71.1:CP200 Table 8. CP200 Series Flow Capacities for 5 psig / 0.34 bar Setpoint ACCURACY SETPOINT + / - 1% ABS PART NUMBER / COLOR SET RANGE 5 psig -0.2 psi 0.2 psi 2 to 5 psig 0.34 bar -14 mbar 14 mbar 0.14 to 0.34 bar GE27213X012 / Orange Stripe CAPACITIES IN SCFH / Nm3/h OF 0.6 SPECIFIC GRAVITY NATURAL GAS Orifice Size, Inch / mm Inlet Pressure 1/8 / 3.2 3/16 / 4.8 1/4 / 6.4 SCFH Nm /h SCFH Nm /h 3 3 SCFH 3/8 / 9.
Bulletin 71.1:CP200 Table 9. CP200 Series Flow Capacities for 10 psig / 0.69 bar Setpoint ACCURACY SETPOINT + / - 1% ABS PART NUMBER / COLOR SET RANGE 10 psig -0.25 psi 0.25 psi 5 to 10 psig 0.69 bar -17 mbar 17 mbar 0.34 to 0.69 bar GE39890X012 / Black Stripe CAPACITIES IN SCFH / Nm3/h OF 0.6 SPECIFIC GRAVITY NATURAL GAS Orifice Size, Inch / mm Inlet Pressure 1/8 / 3.2 3/16 / 4.8 1/4 / 6.4 SCFH Nm /h SCFH Nm /h 3 3 SCFH Nm /h 1/2 / 13 SCFH Nm /h SCFH Nm3/h 3 psig bar 15 1.
Bulletin 71.1:CP200 Table 10. CP200 Series Flow Capacities for 15 psig / 1.0 bar Setpoint ACCURACY SETPOINT + / - 1% ABS PART NUMBER / COLOR SET RANGE 15 psig -0.3 psi 0.3 psi 10 to 20 psig 1.0 bar -20 mbar 20 mbar 0.69 to 1.4 bar GE30200X012 / Purple Stripe CAPACITIES IN SCFH / Nm3/h OF 0.6 SPECIFIC GRAVITY NATURAL GAS Orifice Size, Inch / mm Inlet Pressure 1/8 / 3.2 SCFH psig 3/16 / 4.8 Nm3/h SCFH 1/4 / 6.4 Nm3/h bar SCFH 3/8 / 9.
Bulletin 71.1:CP200 Table 12. CP205 and CP206 Series Flow Capacities for 1 psig / 69 mbar Setpoint ACCURACY SETPOINT + / - 1% ABS SET RANGE 1 psig -0.16 psi 0.16 psi 1 to 2 psig 69 mbar -11 mbar 11 mbar 69 mbar to 0.14 bar PART NUMBER / COLOR GE30199X012 / Yellow Stripe CAPACITIES IN SCFH / Nm3/h OF 0.6 SPECIFIC GRAVITY NATURAL GAS Orifice Size, Inch / mm Inlet Pressure 1/8 / 3.2 scfh 3/16 / 4.8 Nm³/h 1/4 / 6.4 Nm³/h scfh 5/16 / 7.9 Nm³/h scfh Nm³/h psig bar Body Size: 3/4 NPT 3 0.
Bulletin 71.1:CP200 Table 13. CP205 and CP206 Series Flow Capacities for 2 psig / 0.14 bar Setpoint ACCURACY SETPOINT + / - 1% ABS SET RANGE 2 psig -0.17 psi 0.17 psi 1 to 2 psig 0.14 bar -12 mbar 12 mbar 69 mbar to 0.14 bar PART NUMBER / COLOR GE30199X012 / Yellow Stripe CAPACITIES IN SCFH / Nm3/h OF 0.6 SPECIFIC GRAVITY NATURAL GAS Orifice Size, Inch / mm Inlet Pressure 18 / 3.2 scfh psig bar 3/16 / 4.8 Nm³/h scfh 1/4 / 6.4 Nm³/h scfh 5/16 / 7.
Bulletin 71.1:CP200 Table 14. CP205 and CP206 Series Flow Capacities for 5 psig / 0.34 bar Setpoint ACCURACY SETPOINT + / - 1% ABS SET RANGE 5 psig -0.2 psi 0.2 psi 2 to 5 psig 0.34 bar -14 mbar 14 mbar 0.14 to 0.34 bar PART NUMBER / COLOR GE27213X012 / Orange Stripe CAPACITIES IN SCFH / Nm3/h OF 0.6 SPECIFIC GRAVITY NATURAL GAS Orifice Size, Inch / mm Inlet Pressure 1/8 / 3.2 scfh 3/16 / 4.8 Nm³/h 1/4 / 6.4 Nm³/h scfh 5/16 / 7.9 Nm³/h scfh Nm³/h psig bar Body Size: 3/4 NPT 10 0.
Bulletin 71.1:CP200 Table 15. CP205 and CP206 Series Flow Capacities for 10 psig / 0.69 bar Setpoint ACCURACY SETPOINT + / - 1% ABS SET RANGE 10 psig -0.25 psi 0.25 psi 5 to 10 psig 0.69 bar -17 mbar 17 mbar 0.34 to 0.69 bar PART NUMBER / COLOR GE39890X012 / Black Stripe CAPACITIES IN SCFH / Nm3/h OF 0.6 SPECIFIC GRAVITY NATURAL GAS Orifice Size, Inch / mm Inlet Pressure 1/8 / 3.2 scfh 3/16 / 4.8 Nm³/h scfh 1/4 / 6.4 Nm³/h scfh 5/16 / 7.
Bulletin 71.1:CP200 Table 16. CP205 and CP206 Series Flow Capacities for 15 psig / 1.0 bar Setpoint ACCURACY SETPOINT + / - 1% ABS SET RANGE 15 psig -0.3 psi 0.3 psi 10 to 20 psig 1.0 bar -20 mbar 20 mbar 0.69 to 1.4 bar PART NUMBER / COLOR GE30200X012 / Purple Stripe CAPACITIES IN SCFH / Nm3/h OF 0.6 SPECIFIC GRAVITY NATURAL GAS Orifice Size, Inch / mm Inlet Pressure 1/8 / 3.2 3/16 / 4.8 Nm /h scfh Nm /h 3 scfh 5/16 / 7.9 Nm /h scfh Nm3/h 3 psig bar 20 1.4 355 9.5 775 20.
Bulletin 71.1:CP200 Table 17. CP205 and CP206 Series Flow Capacities for 20 psig / 1.4 bar Setpoint ACCURACY SETPOINT + / - 1% ABS SET RANGE 20 psig -0.35 psi 0.35 psi 10 to 20 psig 1.4 bar -24 mbar 24 mbar 0.69 to 1.4 bar PART NUMBER / COLOR GE30200X012 / Purple Stripe CAPACITIES IN SCFH / Nm3/h OF 0.6 SPECIFIC GRAVITY NATURAL GAS Orifice Size, Inch / mm Inlet Pressure 1/8 / 3.2 3/16 / 4.8 1/4 / 6.4 scfh Nm /h scfh Nm /h 3 3 scfh 5/16 / 7.9 Nm /h scfh Nm3/h 3 psig bar 30 2.
Bulletin 71.1:CP200 Table 18. C P200 Series Internal Registration Flow Capacities for 2 psig / 0.14 bar Setpoint with 1% ABS Pressure Factor Accuracy (PFM Approved) ACCURACY SETPOINT + / - 1% ABS SET RANGE 2 psig -0.17 psi 0.17 psi 1 to 2 psig 0.14 bar -12 mbar 12 mbar 0.07 to 0.14 bar PART NUMBER / COLOR GE30199X012 / Yellow Stripe CAPACITIES IN SCFH / Nm3/h OF 0.6 SPECIFIC GRAVITY NATURAL GAS Orifice Size, Inch / mm Inlet Pressure 3/16 / 4.8 1/4 / 6.4 3/8 / 9.
Bulletin 71.1:CP200 Table 19. C P200 Series Internal Registration Flow Capacities for 5 psig / 0.34 bar Setpoint with 1% ABS Pressure Factor Accuracy (PFM Approved) ACCURACY SETPOINT + / - 1% ABS SET RANGE 5 psig -0.20 psi 0.20 psi 2 to 5 psig 0.34 bar -14 mbar 14 mbar 0.14 to 0.34 bar PART NUMBER / COLOR GE27213X012 / Orange Stripe CAPACITIES IN SCFH / Nm3/h OF 0.6 SPECIFIC GRAVITY NATURAL GAS Orifice Size, Inch / mm Inlet Pressure 3/16 / 4.8 1/4 / 6.4 3/8 / 9.
Bulletin 71.1:CP200 Table 20. C P200 Series Internal Registration Flow Capacities for 7 psig / 0.48 bar Setpoint with 1% ABS Pressure Factor Accuracy (PFM Approved) ACCURACY SETPOINT + / - 1% ABS SET RANGE 7 psig -0.22 psi 0.22 psi 5 to 10 psig 0.48 bar -15 mbar 15 mbar 0.34 to 0.69 bar PART NUMBER / COLOR GE39890X012 / Black Stripe CAPACITIES IN SCFH / Nm3/h OF 0.6 SPECIFIC GRAVITY NATURAL GAS Orifice Size, Inch / mm Inlet Pressure 3/16 / 4.8 1/4 / 6.4 SCFH Nm3/h 140 3.8 SCFH 3/8 / 9.
Bulletin 71.1:CP200 Table 21. C P200 Series Internal Registration Flow Capacities for 10 psig / 0.69 bar Setpoint with 1% ABS Pressure Factor Accuracy (PFM Approved) ACCURACY SETPOINT + / - 1% ABS SET RANGE 10 psig -0.25 psi 0.25 psi 5 to 10 psig 0.69 bar -17 mbar 17 mbar 0.34 to 0.69 bar PART NUMBER / COLOR GE39890X012 / Black Stripe CAPACITIES IN SCFH / Nm3/h OF 0.6 SPECIFIC GRAVITY NATURAL GAS Orifice Size, Inch / mm Inlet Pressure 3/16 / 4.8 1/4 / 6.4 3/8 / 9.
Bulletin 71.1:CP200 Table 22. C P200 Series Internal Registration Flow Capacities for 15 psig / 1.0 bar Setpoint with 1% ABS Pressure Factor Accuracy (PFM Approved) ACCURACY SETPOINT + / - 1% ABS SET RANGE 15 psig -0.30 psi 0.30 psi 10 to 20 psig 1.0 bar -21 mbar 21 mbar 0.69 to 1.4 bar PART NUMBER / COLOR GE30200X012 / Purple Stripe CAPACITIES IN SCFH / Nm3/h OF 0.6 SPECIFIC GRAVITY NATURAL GAS Orifice Size, Inch / mm Inlet Pressure 3/16 / 4.8 1/4 / 6.4 SCFH Nm3/h SCFH 3/8 / 9.
Bulletin 71.1:CP200 Table 23. C P200 Series Internal Registration Flow Capacities for 20 psig / 1.4 bar Setpoint with 1% ABS Pressure Factor Accuracy (PFM Approved) ACCURACY SETPOINT + / - 1% ABS SET RANGE 20 psig -0.35 psi 0.35 psi 10 to 20 psig 1.4 bar -24 mbar 24 mbar 0.69 to 1.4 bar PART NUMBER / COLOR GE30200X012 / Purple Stripe CAPACITIES IN SCFH / Nm3/h OF 0.6 SPECIFIC GRAVITY NATURAL GAS Orifice Size, Inch / mm Inlet Pressure 3/16 / 4.8 SCFH psig bar 25 1.7 30 2.1 1000 40 2.
Bulletin 71.1:CP200 type 67CP/CPr INLEt body POSITION 3 OR 4 type 67CP/CPR VENT POSITIOn (VENT POSITION 1) type 67CP/CPr INLEt body POSITION 3 type 67CP/CPR VENT POSITION (VENT POSITION 2) STANDARD POSITION type cp200 piping positions Figure 5. CP200 Series Vent Position and Body Orientation 10.37 / 263 6.01 / 153 14.15 / 359 B C SIDE VIEW 2.02 / 51 INCH / mm 4.04 / 103 TOP VIEW GE34260 Figure 6.
Bulletin 71.1:CP200 0.89 / 23 4.04 / 103 GE34260 INCH / mm npt body Figure 6. Dimensions (continued) Table 24. Dimensions body size inlet Outlet 3/4 3/4 3/4 1 End connection style 1 C 5.84 / 148 9.89 / 251 6.02 / 153 10.
Bulletin 71.1:CP200 Specification Worksheet Application: Specific Use Line Size Gas Type and Specific Gravity Gas Temperature Does the Application Require Overpressure Protection? Yes No If yes, which is preferred: Relief Valve Monitor Regulator Shutoff Device Is overpressure protection equipment selection assistance desired? Regulators Quick Order guide *** ** * Readily Available for Shipment Allow Additional Time for Shipment Special Order, Constructed from Non-Stocked Parts.
