Instruction manual

ControlWave Micro Instruction Manual (CI-ControlWave Micro)
Revised Jun-2013 Installation 2-33
When connecting a ControlWave Micro to an external modem, use the
cable configuration in Figure 2-25.
Figure 2-25. Full-duplex and Half-duplex Cable
Figure 2-26. ECOM Modem Installation
2.5.3 Modem Port (Type 1 ECOM only)
You can mount an optional 56Kb PSTN Hayes-type modem on a Type
1 ECOM (see Figure 2-26).
The ControlWave Micro then assigns the modem COM7 (if in slot #3)
or COM11 (if in slot #4).
You can configure the MultiTech model MT9234SMI modem module
for publicly switched telephone network (PSTN) operation. You can