Instruction manual

ControlWave Micro Instruction Manual (CI-ControlWave Micro)
D-4 Modem Installation Revised Jun-2013
 Bits per second: 9600
 Data bits: 8
 Parity: None
 Stop bit: 1
 Flow Control: None
 Send Factory Default AT&F0.
 Disable Flow Control AT&K0.
 Set baud rate using AT Command for example:
AT$SB9600,
(Modify for whatever baud rate you require.)
 Write to memory AT&W.
5. Set ECOM Module configuration jumper JP2 into a storage
position.