Instruction manual

ControlWave Micro Instruction Manual (CI-ControlWave Micro)
Revised Jun-2013 Introduction 1-11
Figure 1-8. ControlWave Programming Environment
The tools which make up the programming environment include:
 ControlWave Designer is your load-building package. It offers
several different methods for you to create control strategy programs
that run in your ControlWave Micro. You can use pre-made function
blocks, ladder logic, or structured languages. The resulting process
control strategy programs (called projects) are fully compatible
with IEC 61131 standards. For information on ControlWave
Designer, see the Getting Started with ControlWave Designer
manual (document D5085), the ControlWave Micro Quick Setup
Guide (document D5124), and the ControlWave Designer
Programmer’s Handbook (document D5125).
 The I/O Configurator, accessible via a menu item in ControlWave
Designer, allows you to define process I/O modules in the
ControlWave and configure the individual mapping of I/O points for
digital and analog inputs and outputs. For information on the I/O
Configurator see
the ControlWave Designer Programmer’s
Handbook (document D5125).