Instruction manual

ControlWave Micro Instruction Manual (CI-ControlWave Micro)
5-10 Service & Troubleshooting Revised Jun-2013
Module LED Name LED Color Function
PSSM 6 STATUS Red See Table 5-2 and Figure 5-5
CPU C1 RX (Comm 1) Red ON = RX activity (top left; see Figure 5-6)
CPU C1 TX (Comm 1) Red ON = TX activity (top left; see Figure 5-6)
CPU C2 RX (Comm 2) Red ON = RX activity (middle left; see Figure 5-6)
CPU C2 TX (Comm 2) Red ON = TX activity (middle left; see Figure 5-6)
CPU C3 RX (Comm 3) Red ON = RX activity (bottom left; see Figure 5-6)
CPU C3 TX (Comm 3) Red ON = TX activity (bottom left; see Figure 5-6)
CPU ENET Port 1 Green ON = TX activity (J6 bottom; see Figure 5-6)
CPU ENET Port 1 Yellow ON = RX activity (J6 top; see Figure 5-6)
ECOM1 EC 4/8 RX (Comm 4) Red ON = RX activity (top left; see Figure 5-7)
ECOM1 EC 4/8 TX (Comm 4) Red ON = TX activity (top right; see Figure 5-7)
ECOM1 EC 5/9 RX (Comm 5) Red ON = RX activity (2
nd
from top left; see Figure
5-7)
ECOM1 EC 5/9 TX (Comm 5) Red ON = RX activity (2
nd
from top right; see Figure
5-7
ECOM1 Radio RX (Comm6)
1
Red ON = RX activity (3
rd
from top left; see Figure
5-7) (Note: Radio no longer offered- ignore -
always ON)
ECOM1 Radio TX (Comm6)
1
Red ON = TX activity (3
rd
from top right; see Figure
5-7) Note: Radio no longer offered (always
OFF)
ECOM1 Modem RX (Comm7)
1
Red ON = RX activity (bottom left;; see Figure 5-7)
ECOM1 Modem TX (Comm7)
1
Red ON = TX activity (bottom right; see Figure 5-7)
ECOM2 EC4/8 RX (Comm 4/8)
1
Red ON = RX activity (top left; see Figure 5-8)
ECOM2 EC4/8 TX (Comm 4/8)
1
Red ON = TX activity (top right; see Figure 5-8)
ECOM2 EC5/9 RX (Comm 5/9)
1
Red ON = RX activity (2
nd
from top left; see Figure
5-8)
ECOM2 EC5/9 TX (Comm 5/9)
1
Red ON = TX activity (2
nd
from top right; see Figure
5-8
ECOM2 EC6/10 RX (Comm 6/10)
1
Red ON = RX activity (3
rd
from top left; see Figure
5-8)
ECOM2 EC6/10 TX (Comm 6/10)
1
Red ON = TX activity (3
rd
from top right; see Figure
5-8)
ECOM2 EC7/11 RX (Comm 7/11)
1
Red ON = RX activity (bottom left;; see Figure 5-8)
ECOM2 EC7/11 TX (Comm 7/11)
1
Red ON = TX activity (bottom right; see Figure 5-8)
IDI INPUT (16 LEDs,1 per point) Red LED ON = Input is present
LED OFF = Input not present (see Figure 5-9)
IDO OUTPUT (16 LEDs,1 per
point)
Red LED ON = Output is ON (see Figure 5-9)
DI/O
IDI/O
INPUT (12 LEDs, 1 per point) Red LED ON = Input is present
LED OFF = Input not present (see Figure 5-9)
DI/O
IDI/O
OUTPUT (4 LEDs, 1 per point) Red LED ON = Output is ON (see Figure 5-9)
HSC INPUT (4 LEDs, 1 per point) Red LED ON = Input activity on input is present
LED OFF = No activity on input (see Figure 5-