Instruction manual

ControlWave Micro Display/Keypad Instruction Manual (D5135)
Figure 4-9. Using the List Menu Display
4.3.3 Activating Scrolling for the Selected List
To activate scrolling after you’ve selected a list, press [F3] (Scrl in
legend line.)
4.3.4 Moving Through a Variable List Manually
After you select a list and press [ENTER] the display shows the
currently Selected List and the first variable in the list.
If you only want to view variables, press [F1] (Read in legend line).
If you want to change variable values, press [F2] (Write in legend line).
Once you’ve chosen read or write, you can move through the list to see
additional variables.
Press [F2] (Next in legend line) to view the next variable in the list.
You can also do this by pressing the down [▼] arrow key.
Press [F1] (Prev in legend line) to view the previous variable in the list.
You can also do this by pressing the up [▲] arrow key.
Automatic wraparound occurs in either direction. When you reach the
end of the list, [F1] displays the first variable again. At the top of the
list, [F2] displays the last variable of the list.
4.3.5 Changing Variables
From Figure 4-9, you can change variable values by pressing [F2]
(Write in legend line).
Note: If your display (Figure 4-9) does not contain Write in the
legend line, your password will only allow you to read
variables. If you want to change variable values, you must first
4-8 Using the 25-button Display/Keypad Issue Nov-2010