Instruction manual

ControlWave Micro Display/Keypad Instruction Manual (D5135)
4.3 Options after You Log On
Once you successfully log on, the legend line shows that you have four
options. You can:
 View and change the time and date of the ControlWave controller’s
clock. (Clk)
 Call up a menu of available lists. (Menu)
 Scroll through an existing list and view data. (Scrl) See Section 4.1.
 Return to the Identifier Display. (Exit)
4.3.1 Setting the ControlWave’s Clock
Once you log on, press [F1] from the logged on display (Clk legend in
Figure 4-5C). This opens the Clock Display (Figure 4-6) which shows
the current tim
e and date.
Today's date is shown in the first line in the format mm/dd/yyyy where
mm is the two-digit month, dd is the two-digit day, and yyyy is the four-
digit year.
The current time is shown in the form hh:mm:ss where hh is the hour
(0-23), mm is the minute (0 to 59) and ss is the second (0 to 59).
Figure 4-6. Clock Display
Setting
the Time
From the display shown in Figure 4-6, press Time [F2]. Colons (:)
appear on the third line see Figure 4-7. Enter the new time there and
press [ENTER].
Valid tim
es range from 00:00:00 to 23:59:59. The keypad/display
ignores invalid entries. The display updates to show the new time.
Figure 4-7. - Time Set Display
4-6 Using the 25-button Display/Keypad Issue Nov-2010