Product data

Product Data Document
1660ds9b / D301294X012
October 2011 - Page 7
ControlWave GFC Plus
Remote Automation Solutions
www.EmersonProcess.com/Remote
CONTROLWAVE GFC PLUS STANDARD
APPLICATION PROGRAM
You can select from a variety of standard applica-
tions. Currently available are the 1 – 2 run M&R
standard application and a TeleFlow Emulator ap-
plication.
ControlWave GFC Plus is shipped with the program
(.pro le) loaded in Flash and the Flash Congura-
tion Program (FCP) also loaded.
Each run can be orice, turbine or ultrasonic •
meter type
Flow calculations include the following:•
AGA3-1992 with selectable AGA8 Gross or •
AGA8 Detail
AGA3-1985/NX-19•
AGA7/NX-19•
AGA7 with selectable AGA8 Gross or AGA8 •
Detail
Auto Adjust AGA7/NX-19•
Auto Adjust AGA7 with selectable AGA8 Gross •
or AGA8 Detail
AGA9•
Allows the user to select the integral sensor •
assembly or an external transmitter for a single
run conguration or as run 1 in a multiple run
conguration. External transmitters can be
interfaced via RS 485 or analog inputs.
Includes run switching•
Includes an auto-selector, PID ow/pressure •
control algorithm per run or per station
Resides on a BSAP SCADA network•
Supports a sampler and an odorizer•
Hourly Historical Data Log•
The Hourly Data Log holds one record for every
contract hour. Hourly logs hold 840 entries or 35
days; this ensures that the previous period of hourly
data is always resident in ControlWave GFC Plus
FLASH memory. The following items are stored in
the Hourly Data Log:
Corrected Volume•
Uncorrected Volume•
Accumulated Energy•
Average Static Pressure•
Average Temperature•
Average Differential Pressure•
The user’s interface to the Standard Ap-
plication Program is via a series of straight-
forward web style menu pages.
Overview of the Standard Application Program
Uses pre-congured web style menu pages for •
user readings, conguration and maintenance—
PC menu pages can be modied and new
pages congured to work with a modied
application load
Uses the TechView Calibration Utility for •
calibration of all transducers, including the
integral MVT and external, Bristol transmitters
(e.g., 3808 MVT)
The PC menu pages, calibration utility and •
program load are all included on the BSI Cong
CD.
Standard conguration is a one-to-two run •
station