Product data

Product Data Document
1660ds9b / D301294X012
October 2011 - Page 16
ControlWave GFC Plus
Remote Automation Solutions
www.EmersonProcess.com/Remote
Voltage); 1.0 mA (Max) @ 6V (Input Voltage)
Surge Capability: Withstand surge of 100A with 10 x
160 microsecond waveform.
Temperature: Operating Range: -40º to +60ºC (-40º
to 140ºF); Storage Range: -40º to +85ºC (-40º to
185ºF)
Relative Humidity: 15% to 90%, non-condensing
RadioSpecications
For specications on the radios, please refer to the
Emerson Process Management web site, www.
emersonprocess.com/Remote where individual data
sheets are available in pdf format.
Radio Power Consumption
NOTE: When conserving power, ControlWave GFC
Plus turns power to the radios completely off instead
of operating them in the sleep mode.
Freewave FGR Spread Spectrum Radio Figures at
12 Vdc:
Receive: 75 mA•
Transmit: 500 mA•
Idle: 20 mA•
MDS TransNet 900 Spread Spectrum Radio Figures
at 13.8 Vdc:
Receive: 115 mA•
Transmit: 510 mA•
MDS models 4710 and 9710 Licensed, UHF Radios
with gures at 13.8 Vdc:
Receive: 125 mA•
Transmit: 2000 mA•
MDS entraNet 900 IP Radio Figures at 13.8 Vdc:
Receive: 100 mA•
Transmit: 510 mA•
MDS iNet 900 Ethernet/IP Radio Figures at 13.8
Vdc:
Receive: 203 mA•
Transmit: 580 mA•
ACCESSORIES
PC CABLES
For local PC operations, users can select either
a ten-foot or 25-foot cable. These cables match
up to the circular connector on the bottom of the
ControlWave GFC Plus door.
10-foot Cable – p/n 395402-01-8
25-foot Cable – p/n 395402-02-6
STANDARD APPLICATION PROGRAM AND PC
MENU PAGES
ControlWave GFC Plus comes pre-loaded with the
Standard Application Program (.pro le) in Flash.
However, the PC menu pages are not loaded in
Flash but are available either via the Emerson
Process Management web site or on a CD. The
CD is the “BSI Cong” CD, which also contains the
TechView as well as a copy of the Standard Applica-
tion Program.
BSI Cong CD – p/n 395575-02-8
For users wishing to modify the Standard Applica-
tion Program, it is available as source code. Please
contact Emerson’s Remote Automation Solution
Application Services for information.