Instruction manual

ControlWave Gas Flow Computer (GFC Plus) Instruction Manual (CI-ControlWave GFC Plus)
Revised Feb-2013 Installation 2-25
You mount the digital to relay I/O board (two maximum) to the inside
of the enclosure using a Snap Track that is secured to a dual PCB
mounting bracket.
Figure 2-13. Digital to Relay I/O Board
2.8 ControlWave Loop Supply Option
ControlWave loop supplies provide non-regulated 24Vdc power outputs
that can be used to power field devices such as transmitters or non-
isolated I/O circuits (see PIP-ControlWaveLS).
Figure 2-14. ControlWave Loop Supply Board