Specifications

Supplement – CW-GFC-IS
Notes:
 You must wire all connections from the terminal panel out through a
conduit on the right side of the GFC-IS / Corrector-IS enclosure (see
Figure 4).
 The ControlWave GFC-IS/Corrector-IS supports an optional
intrinsically safe proximity sensor interface board (ISPROX). For
details on the ISPROX, see PIP-CW ISPROX.
Figure 4. Conduit for Wiring
Wiring the Communication Ports
COM1 is pre-wired to a connector with a plug-type cover on the bottom
of the door of the enclosure (see Figure 5). Use COM1 only in an area
know
n to be non-hazardous to connect a laptop for local access to
the unit.
Figure 5. COM1 Connector (in Door) for Local Communication Access
4 Supplement to CI-ControlWave GFC / CI-ControlWave Corrector Issued Nov-09