Specifications

Supplement – CW-GFC-IS
 Pulse/DI inputs on the CPU board are 10 kHz high speed counter
(HSC) inputs.
Figure 1. ControlWave GFC-IS / ControlWave Corrector-IS
Chapter 2 – Installation / Configuration
Warning
To ensure safe use of this product, please review and follow the
instructions in the following supplemental documentation:
Supplement Guide - ControlWave Site Considerations for Equipment
Installation, Grounding, and Wiring (S1400CW)
ESDS Manual – Care and Handling of PC Boards and ESD Sensitive
Components (S14006)
Wiring the I/O
There are certain differences between I/O in the standard ControlWave
GFC / ControlWave Corrector and the intrinsically safe version:
 Digital outputs have a V
max
of 10Vdc and an I
max
of 250 mA.
 Analog inputs support 1-5V operation only. They do not support 4-
20 mA operation.
 There are no analog outputs.
2 Supplement to CI-ControlWave GFC / CI-ControlWave Corrector Issued Nov-09