Specifications

4-6 • E2 RX/BX/CX I&O Manual 026-1610 Rev 10 06-APR-2010
and replace it with an identical 3.6V battery obtained from
or approved by Retail Solutions. DO NOT USE AA BAT-
TERIES IN THIS BATTERY SLOT.
After replacing the battery, you must tell E2 the battery
has been replaced so it can reset its battery life counter.
1. Log in to E2 (level 4 password or higher).
2. Press
, followed by --- to
navigate to the System Tests screen.
3. Move the cursor to the Replace Battery field.
Press
 for Yes, then press .
4. Make sure the new battery is in place, and
press
.
If successful, the battery icon should disappear from
the top of the screen. If it is still there, check for proper
battery placement, verify the battery enable switch posi-
tion, and repeat this procedure.