Specifications

11-18 • E2 RX/BX/CX I&O Manual 026-1610 Rev 10 06-APR-2010
For Base Log setup, select 1. Log Groups from this
menu:
The summary screen for Logging Groups will open
where a variety of log parameters can be viewed. Log
group name, configured resolution setting, number of days
to keep logs, the amount of available logging resources,
number of analog and digital points associated with this
logging group, status, and more can all be seen from this
summary screen.
Highlight the desired logging group and press

to open the setup screen for that log group:
From this screen, logging group configuration can be
specified. Group name, interval between log records,
mode, start date and time, duration of logs, log resolution,
points, percentage used, status, and enable/disable logging
can be configured. (See the online help for each property
for more information on what individual parameters do.)
11.5.4 Logging Group Status
Screen
From the Logging Group Summary screen, you can
also access the Status screen for any logging group in the
list by highlighting the desired group and pressing Enter:
From the Status screen you can:
• View configuration and usage information for the
selected logging group.
• Display the Logging Group Report (press Enter, 8,
1).
• Display the Application Log Report (press Enter,
8, 2).
• Turn off logging for all points associated with that
logging group (press Enter, 9, 1).
• Go back to the Setup screen (press
).
11.5.5 Log Reports
A selection of log reports are available that indicate
system resource usage (how much disk space logging con-
figurations use), resolution settings, the duration logs are
stored, number of analog and digital points, and all the
types of logged points that belong to groups, specific
applications, or the entire system.
Figure 11-9
- Summary Screen for Logging Groups
Figure 11-10 - Logging Setup
Figure 11-11 - Status Screen for Logging Groups