READ AND SAVE THESE INSTRUCTIONS BATALIE BREEZE™ 52” Wet Location Ceiling Fan Owner's Manual Model Numbers CF621SW00 Satin White CF621VNB00 Venetian Bronze CF621VS00 Vintage Steel Net Weight: 26.5 Lbs. Questions, problems, missing parts: Before returning to the store call Emerson Electric Customer Service 8 a.m. - 6 p.m., Eastern, Monday-Friday Part No. F40BP74770001 Revision: 140611 1-800-654-3545 www.emersonfans.com Form No. BP7477-1 U.L. Model No.
Table of Contents Section Page 6. Fan Speed and Direction . . . . . . . . . . . . . . . . . . . . . . . .12 7. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 8. Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 9. Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 10. Repair Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-17 Ceiling Fan Limited Warranty . . . . . . . . . . . . . . . . . .
1. Unpacking Instructions ! PACKAGE CONTENTS WARNING Do not install or use fan if any part is damaged or missing. Call Toll-Free: Part A B C D E F G H I 1-800-654-3545 ! WARNING This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage.
1. Unpacking Instructions (continued) THIS FAN IS SUITABLE FOR WET LOCATIONS SUCH AS PORCHES, PATIOS, AND DECKS. This Manual Is Designed to Make it as Easy as Possible for You to Assemble, Install, Operate and Maintain Your Ceiling Fan Installed Wire Length Up to 50 ft. 50-100 ft. Tools Needed for Assembly One Phillips head screwdriver One 1/4” blade screwdriver One stepladder One wire stripper ! Materials Wire Size A.W.G.
3. Ceiling Fan Assembly 3.1 PIN HANGER BALL Remove the hanger ball by loosening the setscrew in the hanger ball until the ball falls freely down the downrod (Figure 1). Remove the pin from the downrod, then remove the hanger ball. Retain the pin and hanger ball for reinstallation in Step 3.5. SETSCREW DOWNROD Figure 1 3.2 Loosen setscrew in motor coupling if necessary. Separate, untwist and unkink the three 80” motor leads. Route the motor lead wires through the downrod.
3. Ceiling Fan Assembly (continued) 3.5 HANGER BALL Reinstall the hanger ball (Figure 4) on the downrod as follows. Route the motor leads through the downrod. Position the pin through the two holes in the downrod and align the ball so the pin is captured in the groove in the top of the hanger ball. Pull the hanger ball up tight against the pin and securely tighten the setscrew in the hanger ball. A loose setscrew could create fan wobble. PIN DOWNROD CEILING COVER SETSCREW 3.
3. Ceiling Fan Assembly (continued) 3.9 #10 - 24 x 12mm WASHER HEAD SCREW (4 per blade/flange) Mount blade flanges to fan blades using four #10 - 24 x 12mm washer head screws and four 16mm flat washers (supplied with fan) (Figure 7). 16mm FLAT WASHER (4 per blade/flange) NOTE: Some accessory blades available are supplied with shorter screws. These shorter screws MUST be used to assemble the blades to flanges. FAN BLADE BLADE FLANGE Figure 7 3.
3. Ceiling Fan Assembly (continued) 3.14 Engage the connector of the switch housing assembly with the motor connector (Figure 10). The two connectors are keyed and color-coded and must be mated correctly (color-to-color) before they can be engaged. Make sure the connector latch closes properly (Figure 10).
4. How to Hang Your Ceiling Fan ! WARNING CEILING The fan must be hung with at least 7' of clearance from floor to blades (Figure 12). AT LEAST 7' Figure 12 ! FLOOR WARNING The outlet box and joist must be securely mounted and capable of supporting at least 50 lbs. Use only a U.L. outlet box listed as “Acceptable for Fan Support of 22.7 kg. (50 lbs.) or less”.
4. How to Hang Your Ceiling Fan (continued) 4.2 NOTE: CEILING COVER, SUPPLY WIRES AND FAN WIRES OMITTED FOR CLARITY. Carefully lift the fan and seat the hanger ball/ downrod assembly on the hanger bracket that was just attached to the outlet box (Figure 14). Be sure the groove in the ball is lined up with tab on the hanger bracket (Figure 13).
5. How to Wire Your Ceiling Fan (continued) 5.2 GROUND WIRE Securely connect the fan motor white wire to the supply white (neutral) wire using wire connector supplied (Figure 15). Securely connect the fan motor black wire and blue wire to the supply black (hot) wire using wire connector supplied (Figure 15).
6. Fan Speed and Direction 6.1 Assembly of the ceiling fan is now complete. Restore electrical power to the branch circuit at the fuse box or breaker panel. 6.2 Connect the fan speed pull chain to the wood pendant with pull chain. (Figure 17). FAN SPEED PULL CHAIN PULL CHAIN COUPLING PULL CHAIN WOOD PENDANT Figure 17 6.3 All fans are shipped from the factory with the reversing switch positioned to circulate air downward. 6.
7. Maintenance IMPORTANT CARE INSTRUCTIONS for your Ceiling Fan ! WARNING Do not use water when cleaning your ceiling fan. It could damage the motor or the blades and create the possibility of an electrical shock. Periodic cleaning of your new ceiling fan is the only maintenance that is needed. When cleaning, use only a soft brush or lint free cloth to avoid scratching the finish. Abrasive cleaning agents are not required and should be avoided to prevent damage to finish. 8. Accessories 1.
9. Trouble Shooting ! WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN. TROUBLE 1. Fan will not start. PROBABLE CAUSE SUGGESTED REMEDY 1. Fuse or circuit breaker blown. 1. Check main and branch circuit fuses or circuit breakers. 2. Loose power line connections to the fan, or loose switch wire connections in the 2. Check line wire connections to fan and switch wire connections in the switch housing. switch housing. ! 3.
Notes 15 emersonfans.com Please contact 1-800-654-3545 for further assistance U.L. Model No.
10. Repair Parts 2 1 3 6 16 15 17 7 8 18 5 4 9 23 10 20 22 11 13 19 21 12 14 16 U.L. Model No.
10. Repair Parts Listing Wet Model Numbers Key No. CF621SW00 CF621VNB00 CF621VS00 Hanger Ball Assembly, Consisting of: Hanger Bracket Hanger Ball Downrod (4.
Notes 18 U.L. Model No.
Emerson Air Comfort Ceiling Fan Limited Warranty What The Limited Warranty Covers: This limited warranty is offered by Air Comfort Products division of Emerson Electric Co. ("Emerson" "we" or "us") located at the address stated below to the original retail purchaser ("you" or "your") of an Emerson Air Comfort Ceiling Fan product ("Emerson Ceiling Fan") and covers the motor and the other components and accessories of the Emerson Ceiling Fan against all defects in workmanship and materials.
Air Comfort Products DIVISION OF EMERSON ELECTRIC CO. 8100 W. Florissant • St. Louis, MO 63136 Questions, problems, missing parts: Before returning to the store call Emerson Electric Customer Service 8 a.m. - 6 p.m., Eastern, Monday-Friday 1-800-654-3545 www.emersonfans.com Retain this manual for future use. Part No. F40BP74770001 Revision: 140611 Printed in China 06/14 Form No. BP7477-1 U.L. Model No.
