Setup guide

Setting up the Hardware

Setting Up the Hardware

This involves unpacking the ControlWave I/O Expansion Rack hardware, mounting the chassis,

installing I/O modules, wiring I/O terminations, making proper ground connections, connecting a

communication cable to the PC workstation and setting switches.

1. Remove the Chassis from its carton and install it at its assigned work site. (see Section 2.3.1

of CI-ControlWaveEXP).

2. Remove the Power Supply Sequencer Module (PSSM) from its carton and install it into

Chassis slot 1, i.e., the first slot from the left end of the installed unit. (see Section 2.3.2 of

CI-ControlWaveEXP).

I/O Modules

(install in chassis

slots 3 to 10)

Ethernet Port 1

Serial Port COM1

Serial Port COM2

Chassis

Port80

Display

Bezel

(Plastic bezel covers the

power supply sequencer

module in slot 1 and CPU

module in slot 2.)

Chassis

Bezel Door

(for access to power

switch and PSSM

LEDs

)