Setup guide

Setting up the Host to Reference the I/O Rack
28
Digital Output Board Page
List of Available Pins
Displays a list of the individual pins (I/O points) on this process
I/O board. If the pin is displayed in RED, that pin is active. If the
pin is left grayed out, that pin is considered unused.
Pin Name
Is a name identifying this pin. This name is used as a variable
name in your POU to reference the I/O pin.
Set Pin Status
Sets the initial value for this digital output (DO). (DO ONLY).
Add Board Status
When selected, will cause a variable to be created to store board
status information.
Mark All Pins Used
When checked, will activate all pins on this I/O board. They will
all appear in RED.
When all pins have been configured, click on [Done]. You can then proceed to configure another
board.
High Speed Counter (ER_HSC12) Board
High Speed Counter Page