Setup guide

Setting up the Host to Reference the I/O Rack
22
Select List of Boards:
NOTE: The I/O Configuration Wizard starts with page 2 by default; you do NOT need to use
page 1 for this configuration.
The I/O Configuration Wizard allows the user to identify which process I/O boards are actually
installed in the I/O Expansion Rack. Boards should be selected from the “Available Boards
List” list box in the ascending order of their slot number in the rack.
First, choose the “Unit Type”. This specifies the type of ControlWave host you are using.
(‘CW_’ = ControlWave, ‘LP_’ = ControlWave LP, ‘CWM_’ = ControlWave MICRO.).
First, speci
f
y the type o
f
host
C
ontrolWave
Then for each board which
choose the board name, then click on to
add the board to the .
resides in the rack,
[Add]
“Selected Boards List
”