Setup guide

Setting Configuration Parameters
12
C
hoose the communication port on
(NOT on the Expanded I/O Rack)
the P
C
workstation
Specify the baud rate for that port
Finall
y
, click on [Next>]
Setting Configuration Para meters
Establishing Communications Using LocalView
Before you begin, you must plug a cable from a serial port on your PC running Open BSI, to
serial port COM2 on the I/O Expansion Rack.
1. Click as follows: StartÆProgramsÆOpenBSI ToolsÆLocalView
2. Choose 'Local' for the mode, enter a name for the LocalView file, and click on [Create].
3. Choose the communication port on the PC workstation which you will use to communicate
with the ControlWave I/O Expansion Rack. Then, specify the baud rate for that port, and
click on the [Next>] button.
First, choose
'Local' as
the mode.
Next, enter a
name for this
LocalView
file.
Finally, click
on
[Create]