Instruction manual

CI-ControlWaveLP Specifications / 4-7
Table 4-9 - PSSB Connector J1 - FMI/OB Connector P9 Pin Identification
(see Section 2.4.6)
Pin # J1/P9 Pin Name Pin # J1/P9 Pin Name
1 CHASSIS 2 GND
3 +5V (VCC) 4 /EXTBAT_DOUT
5 /BATADCCE 6 /BATADCCLK
7 +12V 8 -12V
9 +5V (VCC) 10 /MC
11 /PFIN 12 /MCLED
13 /PFINLED 14 GND
15 /WDOGB 16 VCC
17 GND 18 GND
19 PSGND 20 +VIN
4.3.1 Analog Inputs
Number of Inputs: 8 Analog Differential Inputs (Selectable for Current or
Voltage type inputs)
Input Type: Isolated Voltage Input: 1-5 Vdc
Isolated Current Input: 4-20 mA
Powered Current Loop: 4-20mA
Accuracy: 0.1% of Span @ +25°C (+77°F)
0.2% of Span @ -20°C to +70°C (-4°F to +158°F)
0.3% of Span @ -40°C to +70°C (-40°F to 158°F)
Isolated Voltage/Current
Common Mode Range: 38Vdc referenced to Isolated Common
Powered Current Loop
Common Mode Range: 0V referenced to Isolated Common
Input Filtering: Common Mode Range:
Input Filtering: 300 msec to 99.75% of of input value
Channel Settling Time: 300msec
Conversion Time: 200msec
On-board Reference: 1V, 5V - optional
Surge Suppression: 38Vdc MOV across input signals and (-) input to
CHASSIS. 500Vdc MOV isolated common to chassis.
Meets ANSI/IEEE C37.90-1978
Terminations: Pluggable (TB3) - Max. wire size is 16 gauge
Bus Access: 16 Bits Wide