Instruction manual

CI-ControlWaveLP Service / 3-9
Figure 3-9 - FMI/OB Board Misc. Operation & Status LED Assignments
3.2.3 Wiring/Signal Checks
Check I/O Field Wires at the Card Edge Terminal Blocks and at the field device. Check
wiring for continuity, shorts & opens. Check I/O signals at their respective Terminal Blocks
(see Table 3-2).
Table 3-2 - Field I/O Wiring - Terminal Block Reference List
I/O
Subsystem
Terminal
Block
Notes
Discrete Inputs TB1 - FMI/OB See Section 2.4.1
Discrete Outputs TB2 - FMI/OB See Section 2.4.2
Analog Inputs TB3 - FMI/OB See Section 2.4.3
HSC Inputs TB4 - FMI/OB See Section 2.4.4
Watchdog Ckt. TB2 - PSSB See Section 2.4.5