Instruction manual

CI-ControlWaveLP Installation / 2-29
Step 3 - Flash Data Setup
Complete the fields in the Flash Data Setup Wizard (see Figure 2-28), as described, below:
"Please enter the name of the binary file to Flash"
To upgrade system firmware, you must specify the path and name of a binary (*.BIN)
file on your hard disk containing the firmware. Normally, the contents of the various
available BIN files are described in a Flash Master File (see box at bottom of the dialog
box). If you have specified a Flash Master File, double-click on the description of the
binary file you want to download to the RTU. Its path and name will be copied into this
field. (If you do NOT have a Flash Master File, type the path and name of the binary file
directly into this field.)
Figure 2-27 - Flash RTU Setup Menu
Figure 2-28 - Flash Data Setup Menu