Instruction manual

CI-ControlWaveLP Installation / 2-17
2.4.2 Discrete Outputs (see Figures 2-12 & 2-13)
A total of 8 Discrete Outputs (DOs) with surge protection are provided for control or
signaling functions. Each DO utilizes a Solid State Relay that is capable of switching up to
35 volts at up to 100mA. 38V MOVs are provided to protect each DO.
Field connections for DO1 through DO8 are located at TB2 (see Table 2-9).
Table 2-9 - Discrete Output Terminal Block TB2 Pin Assignments
Block
Label
Pin #
(Label)
Name
Pin #
(Label)
Name
Pin #
(Label)
Name
Pin #
(Label)
Name
DO-B 1 (1) DO1- 5 (3) DO3- 9 (5) DO5- 13 (7) DO7-
DO-A 2 (1) DO1+ 6 (3) DO3+ 10 (5) DO5+ 14 (7) DO7+
DO-B 3 (2) DO2- 7 (4) DO4- 11 (6) DO6- 15 (8) DO8-
DO-A 4 (2) DO2+ 8 (4) DO4+ 12 (6) DO6+ 16 (8) DO8+
Figure 2-12 - Discrete Output Terminal Block TB2 - & LEDs
Figure 2-13 - Discrete Output Wired to ControlWaveLP