Instruction manual

2-2 / Installation CI-ControlWaveLP
Figure 2-2 - ControlWaveLP Dimensions - Front View & Left Edge View
2.2 ControlWaveLP SITE CONSIDERATIONS
Check all clearances when choosing an installation site. Make sure that the ControlWave-
LP is accessible for wiring and service. Make sure that the LCD Display Panel and
Keyboard (if present) are accessible to the on-site operator.
The unit’s Mounting Plate measures 8.5” in width by 12.5” in length by .562” in height (see
Figures 2-1 & 2-2). The ControlWaveLP is to be vertically mounted with the elongated
Mounting Plate notches at the top and in accordance with the following restrictions: