Instruction manual
1-22 /Introduction ControlWaveLP
Table 1-11 - FMI/OB Board LED Assignment (Continued)
Name Function Name Function
CR43 DI10 CR114 STATUS 2
CR44 DI11 CR115 STATUS 3
CR45 DI12 CR116 STATUS 4
CR46 DI13 CR117 STATUS 5
CR47 DI14 CR118 COM2_RX/COM2_TX
CR48 DI15 CR120 COM3_RX/COM3_TX
CR49 DO8 CR121 COM4_RX/COM4_TX
CR50 DO1 CR122 COM5_RX/COM5_TX
CR51 DO2 CR134 MCLED*
CR52 DO3 CR135 PFINLED*
CR53 DO7 CR136 COM1_RX/COM1_TX
CR54 DO6 - -
1.3.4 ControlWaveLP Mounting Plate
ControlWaveLP mounting Plates are manufactured from .125 inch thick aluminum and
measure 12.5 inches in length by 8.5 inches in width. Four (4) .5 inch holes are provided to
accommodate installation of the CPU Board in its base (lowest) position. The Control-
WaveLP Mounting Plate also includes four (4) mounting posts that are provided for
mounting the unit’s circuit boards.
Four (4) notches are machined into the ControlWaveLP Mounting Plate; the two on the
top are .5 inch deep (on center) and the two on the bottom are .125 inch deep (on center).
These notches are offset from left and right edges by .7 inch each and are set 7 inches apart
horizontally (see Figure 2-2). The notches accommodate the mounting of the unit to a rear
fabrication panel in an appropriate enclosure, such as a NEMA 3X or 4X box.
1.4 OPTIONS
Options associated with ControlWaveLP units are covered in appendices or referenced
manuals.
PC/104 Analog Output Module .................................................................................. Appendix 1
2 Line X 20 Character LCD Display with 24 Keys .................. Maple Systems Documentation
4 Line X 20 Character LCD Display with 16 Keys .................. Maple Systems Documentation
4 Line X 20 Character LCD Display with 24 Keys .................. Maple Systems Documentation
2 Line X 20 Character VFD Display with 24 Keys .................. Maple Systems Documentation
4 Line X 20 Character VFD Display with 16 Keys .................. Maple Systems Documentation
4 Line X 20 Character VCD Display with 24 Keys.................. Maple Systems Documentation