Instruction manual

ControlWaveLP Introduction / 1-19
Meets ANSI/IEEE C37.90-1978
Terminations: Pluggable (TB4), maximum wire size is 16 gauge
Status Indication: 4 LEDs (one per point) (DS95 - DS98
1.3.3.2 FMI/OB Board Connectors
The FMI/OB Board contains seventeen (17) connectors that function as follows (see Table 1-
9):
Table 1-9 - FMI/OB Board Connector Summary
Ref. # Pins Function Notes
TB1 32-pin FMI/OB DI Field Interface See Table 2-7, Fig. 2-5
TB2 16-pin FMI/OB DO Field Interface See Table 2-8, Fig. 2-8
TB3 24-pin FMI/OB AI Field Interface See Table 2-9, Fig. 2-10
TB4 16-pin FMI/OB HSC Field Interface See Table 2-10, Fig. 2-14
TB5 32-pin PC/104 I/O Field Interface (AO) See Appendix 1
TB6 32-pin PC/104 I/O Field Interface (AO) See Appendix 1
TB7 32-pin PC/104 I/O Field Interface (AO) See Appendix 1
TB8 32-pin PC/104 I/O Field Interface (AO) See Appendix 1
P3 40-pin PC/104 I/O Expansion - (TB5) (AO) See Appendix 1
P4 40-pin PC/104 I/O Expansion - (TB6) (AO) See Appendix 1
P5 40-pin PC/104 I/O Expansion - (TB7) (AO) See Appendix 1
P6 40-pin PC/104 I/O Expansion - (TB8) (AO) See Appendix 1
P1 64-pin PC/104 I/O Expansion - PCB Interface See Table 4-11
P2 40-pin PC/104 I/O Expansion - PCB Interface See Table 4-12
P9 20-pin Power Supply Interface See Table 4-13
P7 68-pin FMI/OB Board to CPU Board (J10) Interface See Table 4-4, Fig. 4-10
P10 68-pin FMI/OB Board to CPU Board (J11) Interface See Table 4-4, Fig. 4-10
FMI/OB Bd. Connector TB1 - Discrete Inputs
(see Figure 2-5)
32-position pluggable terminal block TB1 accommodates field wiring of Discrete Input (DI)
circuits.
FMI/OB Bd. Connector TB2 - Discrete Outputs
(see Figure 2-8)
16-position pluggable terminal block TB2 accommodates field wiring of Discrete Output
(DO) circuits.
FMI/OB Bd. Connector TB3 - Analog Inputs
(see Figure 2-10)
24-position pluggable terminal block TB3 accommodates field wiring of Analog input (AI)
circuits.
FMI/OB Bd. Connector TB4 - High Speed Counter Inputs
(see Figure 2-14)
16-position pluggable terminal block TB4 accommodates field wiring of High Speed Counter
Input (HSC) circuits.
FMI/OB Bd. Connectors P1 & P2 PC/104 Expansion
64-Pin Expansion Connector P1 and 40-Pin Expansion Connector P2 are provided for future
I/O expansion. These connectors provide an interface to a PC/104 Expansion Board such as
the PC/104 Analog Output Module (see Appendix 1).