Instruction manual

4-10 / Specifications CI-ControlWaveLP
RFI Susceptibility: In conformity with the following standards:
ENV 50140 Radio-frequency electromagnetic field,
Amplitude modulated
ENV 50204 Radio-frequency electromagnetic field,
Pulse modulated
4.5 POWER & SPECIFICATIONS
4.5.1 Input Power Specs.
Operating Range: 10.0V to 30.0V (dc) (Shutdown occurs at 10.0V nominal)
Output Voltages: Isolated +5V, +12V & -12V (dc)
Output Current: +5V @ 1A (Max.)
+12V @ 200mA (Max.)
-12V @ 200mA (MaX.)
Input Current: Supply Loading 5V @ 1A, 12V/-12V @ 0mA
Field Supply AI Subsystem (160mA)
DI/HSC Subsystem (20mA)
Vin @ 8.5V - Iin Max. 1.46A
Vin @ 12V - Iin Max. 1.04A
Vin @ 24V - Iin Max. 0.56A
Fusing: 10A Slow Blow 5x20mm Fuse - 12V system
3A Slow Blow 5x20mm Fuse - 24V system
Electrical Isolation: 500Vdc Primary to Secondary
Surge Suppression: 500Vdc MOV PSGND to CHASSIS
32V Transient Suppressor across VIN+ to PSGND
Meets ANSI/IEEE C37.90-1978
Terminations: Fixed, Max. Wire Size is 16 gauge
Shutdown: Max. ON Switchpoint = 10.5V or 22.05V
Min. OFF Switchpoint = 9.95V or 20.49V
Power Switch: MOSFET Driven by Switch connected to Gate
Sequencer Switchpoints: Input Pwr. Max. ON Switchpoint = 10.43V or 21.87V
Input PWR. Min. OFF Switchpoint = 10.2V or 21.1V
5V Max. ON Switchpoint = 4.85V
5V Min. OFF Switchpoint = 4.75V
12V/-12V Max. ON Switchpoint = ±11.52V
12V/-12V Min. OFF Switchpoint = ±11.38V
4.5.2 Watchdog Contacts
Input Signals:: MC* & WDOGB*
Output Signal: Optocoupled SSR drives watchdog relay or Power
MOSFET