Brochure

From major switching and data centers to remote shelters and computer
rooms, Emerson Network Power -48V DC power systems have the features and
proven performance to match your network application needs.
Powerful Solutions
For Critical Data And Telecom Applications
46
NetSure
™
ITM 140kW,
Two Module System
NetSure™ 9500
Benefits of DC Power
for Data Centers
Emerson Network Power’s
platform of AC to 400V DC
power systems is designed to
address emerging applications in
telecommunications, data centers,
and commercial buildings.
400V DC can increase overall power
efficiency, reduce infrastructure
footprint, and improve availability.
DC architecture simplicity:
Fewer components, conversion
stages and distribution breakers
throughout the power chain
ensure high availability;
elimination of complex
synchronization circuits and the
need to de-rate capacity for phase
balancing or harmonics makes it
easy to engineer.
Scalability and ease of
deployment: Minimize your initial
investment and avoid stranded
power by adding expansion DC
UPS modules without interruption
in the field as power needs
increase.
High system efficiency: Reduced
end-to-end power conversion
stages combined with efficient
power conversion units (PCUs) and
an advanced energy optimization
mode enable significant energy
savings even at low loads.
NetSure
™
9500
The 120kW NetSure
™
9500 is an efficient, reliable
AC to DC power system for critical 400V DC power
applications. A flexible and modular design enables
deployment in a variety of site configurations and
allows for scalable buildouts to avoid stranded
capacity. Built on the patented, proven 15kW eSure
™
rectifier, the system offers high efficiency over a wide
operating range and exceptional NetSure
™
reliability.
48 to 400V DC Power Input
NetSure
™
400V DC to -48V DC converter systems can
also be used to extend the copper reduction benefits
of 400V DC to existing -48V DC networking loads in
core telecom applications.
DC UPS
NetSure
™
ITM 400/480V AC 3 Phase Input
The NetSure
™
ITM lowers the cost of data center
design, operation and management. This 48V direct
current solution is a row-based DC UPS that delivers
simple, scalable and highly efficient power protection
in 70kW modules. Up to four DC UPS modules can be
installed together for 280kW of total power.
The NetSure
™
ITM is deployed directly on the server
room floor, providing protected 48V power to nearby
equipment racks. This preserves the efficiency and
reliability benefits of DC power, minimizes the amount
of copper required, and enables modular growth.
48V DC Rack Power Distribution
NetSure
™
RDB Series
Deploy DC power in your rack with zero U, rear mount power distribution units (PDUs)
to maximize rack space available for revenue generating equipment. Featuring plug-
and-play connectors for simple field operation, NetSure
™
RDB 48V Rack Distribution
Units are designed for ultimate ease of use. No special tools are required to maintain or
move IT equipment.
Visit: EmersonNetworkPower.com/DCPower
46