Brochure

Security/Surveillance Protection
Edco CP24—Ideal for protecting the DC power
input to your security camera. The Edco CP-24 is
a quick snap installationfor power applications
up to 24 VDC. For complete protection add the
Edco CCTV-1 to the video input.
Edco CCTV-1-The Edco CCTV-1 application is
specifically designed for protecting closed circuit
TV systems. The protector is easily installed
directly at the camera’s BNC video output.
Edco HVCP-48-BNC -The Edco HVCP-48-BNC
is a hybrid surge protection product. Each
separate circuit is capable of handling
high-current impulses while tightly clamping
transients and allowing critical power and data
to be transmitted.
Edco CX-06-MI- The Edco CX06 Series
implements a three-stage hybrid technology;
offering high energy surge handling capability
directly at your camera. This product is ideally
suited for protecting your video signal in high
exposure applications.
Edco CAT6-POE-I- The Edco CAT6-POE Series
is designed to work on Category 6 Power-Over-
Ethernet transmission line applications and is
ideal for protecting POE cameras. For optimum
protectionuse the Edco CAT6-POE-I at the
camera and the Edco Cat6-POE at the head-end.
Optional DIN mount available.
Edco FAS-1- The Edco FAS-1 and Edco
FAS-2 are multi-stage single-pair or two-pair
surge suppressors designed for high
exposure applications. These products were
specifically designed to meet multiple low
voltage protection applications in the fire and
security industries.
Home and Office Protection
Emerson Network Power manufactures the industry’s
widest range of Surge Protective Devices (SPDs). These
SPDs are ideal for small facilities, large equipment
rooms or entire buildings, plus a wide range of power,
control and data line applications. Each surge protection
product features the rugged reliability that has been the
Liebert trademark for more than 40 years.
Installing protection at the electrical service entrance,
distribution points, branch panelboards and on specific
sensitive loads or equipment throughout your facility is
the best way to prevent damage and eliminate associated
downtime to sensitive microprocessor-based electronics.
Surge Protection And Power Conditioning Systems
Islatrol™ SP-6TVN Series—The Islatrol SP-6TVN is a
surge suppressor/filtering device that features uniquely
designed repositionable outlets and protects sensitive
home/office equipment including home theaters,
satellite dishes, computers, printers and faxes.
300 Series - The 300 Series of surge protection
devices are specifically designed for low to medium
exposure locations.
330 Surge Protective Device— The 330 line is
available with surge current ratings up to 80kA
per mode or 160kA per phase. A status LEDs per
phase and relay contacts provide indication of the
suppression system failure or power loss.
320 Surge Protective Device - The 320 line is
available with surge current ratings up to 50kA per
mode or 100kA per phase. A status LED and relay
contacts provide indication of the suppression
system failure or power loss.
Data/Signal Protection
Edco LCDP Series—The Edco LCDP Series is
designed to conveniently protect 8 wire, low
voltage data circuits and employs two RJ-45 jacks
for easy installation.
Edco RJA-RJD Series—The Edco RJA and Edco
RJD Series are four pair telephone/data line
protectors that implement advanced two stage
hybrid design.
Edco CAT6-5 POE Series—The Edco CAT6-POE
Series is designed to work on Category 5 Power-
Over-Ethernet transmission lines as well as
CAT 6 applications.
Edco PHC Series—This surge suppressor is designed
to protect two pairs of wires specifically for alarm
and security systems where operating currents can
be as high as 5 Amps. It utilizes three-stage hybrid
technology to address overvoltage transients and
sneak and fault current for signaling circuits.
Edco PC642 Series—The Edco PC642 Series
surge suppressor is a two-pair (four-wire) module
implementing three-stage hybrid technology. This
module addresses over-voltage transients with
gas tubes and silicon avalanche components.
Edco Islatrol ™ RM Series—This line of AC surge
protectors is ideal for protecting the power feeding
valuable rack equipment. This series provides
40,000 Amps of surge protection and up to 60 dB
of high- frequency noise filtering.
Edco RM-CAT6 Series—Includes 16 and 48-channel
high-speed data line protectors that utilize
three-stage hybrid technology. These units address
high-energy voltage transients that can damage
expensive network equipment. Ideal for network
patch panels, switches and hubs, these units
mount easily in the same racks as the equipment
they are protecting.
45