User guide

NOTE:An administrator can log into the OBWI and perform all functions without restriction. A user can log in only to a Receiver.
4. Selectoneofthefollowingfortheaccessmode:
• SharedOnly-TheuserwillonlybeabletoestablishsharedKVMsessions.
• PrivateOnly-TheuserwillonlybeabletoestablishprivateKVMsessions.
• PrivateorShared-TheuserwillbeabletoestablisheithersharedorprivateKVMsessions.
5. SelectoneofthefollowingfortheUSBmode:
• Disabled-NoUSBdeviceswillbeextendedtothetarget.
• KeyboardandMouseonly-Onlythekeyboardandmousewillextendtothetarget.
• Alldevicesexceptmassstorage-Onlymassstoragedevicesarenotextendedtothetarget.
• Alldevices-TheusercanconnectanyUSBdeviceintoareceiverandextendittothetarget.
6. ClickSave.
Users–Targetstab
TheTargetstablistsallofthetransmittersavailablefortheswitch.Fromthelistofavailabletransmitters,you
canaddorremoveaccessfortheavailableusers.
Toaddtransmitteraccess:
1. Selectoneormoreusers.
2. OntheUserDetailspane,clickTargets.
3. SelectoneormoretransmittersfromtheAvailableTransmitterslistandclickAdd.
-or-
ClickAdd AlltoaddallofthetransmitterstotheAllowedTransmitterslist.
-or-
Checktheboxtoenableaccesstoalltargets.Enablingalltargetsallowsaccesstoallcurrenttargetsand
anytargetsthatareaddedinthefuture.
4. ClickSave.
Toremovetransmitteraccess:
1. Selectoneormoreusers.
2. OntheUserDetailspane,clickTargets.
3. SelectoneormoretransmittersfromtheAllowedTransmitterslistandclickRemove.
-or-
ClickRemove AlltoremoveallofthetransmittersfromtheAllowedTransmitterslist.
-or-
Un-checktheboxtoenableaccesstoalltargets.
4. ClickSave.
Chapter 3: On-Board Web Interface 19