User Guide

42.....Avocent® ACS6000 Advanced Console Server
Ports Navigation Tree
pool_members=
dial-in_profile
secure_dial-in
callback_users
settings
log_in_to_appliance=
otp_login_authentication=
ppp_connection=
ppp|pap_authentication=
Command Summary
set_cas
Edits the command to configure a list of serial ports with the CAS profile. Syntax: set_cas<serial
port number>, <serial port number> This command has five sub-nodes: physical, cas, data_
buffering, alerts and power.
set_dial-in Edits the command to configure one serial port with the Dial-In profile. Syntax: set_dial-in<serial
port number>
set_power
Edits the command to configure a list of serial ports with the Power profile. Syntax: set_
power<serial port number>, [<serial port number>] This edit has two sub-nodes: physical and
power.
set_dial-
out
Edits the command to configure one serial port with Dial-out on demand profile. Syntax: set_dial-
out <serial port number>
set_
socket-
client
Edits the command to configure one serial port with Socket Client profile. Syntax: set_socket-
client <serial port number>
clone_
ports
Copies the configuration from one port to a list of serial ports. Syntax: clone_ports<serial port
number>
reset_
port_to_
factory
Resets the serial ports to factory configuration. (This is disabled for CAS profile.) Syntax: reset_
port_to_factory<serial port number>, [<serial port number>]
enable_
ports
Enables serial ports. Syntax: enable_ports<serial port number>, [<serial port number>]
disable_
ports
Disables serial ports. Syntax: disable_ports<serial port number>, [<serial port number>]
Serial Port Commands
Example of how to set a list of serial ports 2,5 and 6 with the CAS Profile and enable the
status:
--:- serial_ports cli-> cd /ports/serial_ports
--:- serial_ports cli-> set_cas 2,5,6
--:#- [serial_ports/physical] cli-> set status=enabled
--:#- [serial_ports/physical] cli-> show
Selected items: 2|5|6
Port: 2