User Guide

24.....Avocent® ACS6000 Advanced Console Server
Field Description
For Appliance
Name Name assigned to the appliance (for example, ACS6048-1357908642)
Port N/A
Type N/A
Status N/A
For Serial Port
Name
Either the default name [ XX - XX - XX -p- n (where n =port_number)], an administrator-assigned alias or
an auto-discovered server name
Port Number of the serial port
Type Serial
Status Idle / In-Use
For Power
Name
PDU ID (either the default name in the format XX - XX - XX P XX _ n or an administrator-assigned alias,
such as myPDU)
Port Number of the serial port/position on the chain
Type PDU model
Status Number of Outlets ON | Total outlets
For
Outlets
Enter cd <PDU_ID>/outlets and enter show to see list of outlets and the actions that can be taken
(commands that can be executed) for each outlet as shown below.
Name
Either the default XX - XX - XX P XX _ n _ n or an administrator-assigned name
Port PDU outlet number
Type Outlet
Status ON / OFF
Action None
Access Parameters
To view information about the console server and connected devices:
1. Log into the CLI and enter cd access to change to the Access level.
--:- / cli-> cd access
2. Enter show. Information about the console server and the ports the current user is authorized
to access appears.
--:- access cli-> show
Name Port Type Status
=====================================
ACS6016-0011223344
21-67-72-p-1 1 serial in-use
21-67-72-p-2 2 serial idle
21-67-72-p-4 4 serial idle
myPDU 3|1 PM8|15A 8|8
Type ls to see available sub-nodes