User Guide

82.....Avocent® Universal Management Gateway Appliance Installer/User Guide
USBDevices
From the sidebar, click USB Devices to view the name, type, information and status of any
connected USB devices. You can also enable or disable all USB ports on the appliance as well as
eject any devices so that they can be shut down properly.
To mount a USB Mass Storage device:
1. Click USB Devices.
2. Check the box next to the device and click Start. When the status of the device has changed to
Do not remove, the device will be mounted on /media/usbhd-port1-4 directory.
To unmount a USB Mass Storage device:
1. Click USB Devices.
2. Check the box next to the device and click Stop. When the status of the device has changed to
Safe to remove, it is safe to remove the device.
Sensors
Sensor ports are located on the back of the appliance and are used to collect data from supported
sensors. Sensors are not automatically detected and must be manually added and enabled. To
view the status on the sensors, click Sensors.
NOTE: Some appliance models do not include sensor ports.
Sensor Ports
Number Name Type
1 SNSR/COM2 (RS-485) Temperature, Humidity and Water
Sensor Ports