User Guide

74.....Avocent® Universal Management Gateway Appliance Installer/User Guide
Factory reset
After the module has been configured, you can return it to the factory default settings.
To factory reset UMIQ modules:
1. From the sidebar, click Targets - KVM Management to open the Appliance UMIQ screen.
2. Select the checkbox next to the UMIQ module you wish to delete, and click Factory Reset.
NOTE: Performing a factory reset will remove all custom settings.
Active sessions
If your model of the appliance supports KVM connections, click Targets - KVMManagement to
view KVM connections.
The following fields are displayed in the Active Sessions window:
• Session Mode - Displays the type of session. Options are normal and exclusive. Normal is an
interactive session that may be shared with other users. Exclusive is a private session that
does not allow sharing by other users.
• Type - Session type, which may be KVM, virtual media or serial.
• Name - The name of the target.
• User - User who initiated the session, which may be a user, a local port user or a user with a
local user account.
• Duration - Current length of the console session.
• Client - IP address of the client computer connected to the session.
• EID - Displays the unique electronic ID embedded in the module.
To view or terminate active sessions:
1. Click Active Sessions.
2. Select the box(es) next to the session(s) you wish to terminate. Click Terminate.
Default settings
KVM default settings are global settings that will apply to new UMIQ modules. These settings have
no effect on existing UMIQ modules. However, you can apply the default settings to existingUMIQ
modules by performing a factory reset.