User Guide

66.....Avocent® Universal Management Gateway Appliance Installer/User Guide
CASprofile
From the CASprofile page, you can configure the serial console features, including the host name,
auto discovery, auto speed and auto time-out.
To configure the CASprofile:
1. From the sidebar, click Targets - Serial Management.
2. Click the CASProfile tab.
3. Under the Settings heading, enter the auto discovery timeout and probe timeout in number of
seconds.
4. To add an auto answer input and output string, click Add. Enter a new string in the Input String
or Output String fields and click Apply.
-or-
To delete an auto input and output string, select the checkbox next to the string you want to
delete. Click Delete.
5. To change the default auto discovery time-out or probe time-out, perform the following steps.
a. Select Settings.
b. Enter a new value in the Auto Discovery Timeout and Probe Timeout fields.
c. Select a speed from the Default Speed on Auto Discovery Failure drop-down list and
Probe Speed List.
d. Click Save.
6. To add a new probe or match string or delete an existing string, perform the following steps.
a. To add a string, click Add, enter a new string in the New Probe String or New Match
String field and click Save.
b. To delete a string, select the checkbox for the string and click Delete.
7. Click Apply.
PDUmanagement
Connected power devices can be used for remote power management. The appliance enables
users who are authorized for power management to turn power on, turn power off and reset
devices that are plugged into a connected PDU.
The following table displays the types of PDUs supported, the communication protocols used and
the ports that can be connected.