User Guide

58.....Avocent® Universal Management Gateway Appliance Installer/User Guide
vKVMsession. If you wish to change the default vKVMoption and if vKVMis supported by the SP,
from the Modify SPpage, select whether Java or ActiveXis the preferred viewer. You can then
open a session by selecting the SPfrom the Targets tab, by clicking the Sessions tab and clicking
Virtual KVM/Media.
NOTE: Microsoft Internet Explorer is the only browser that supports ActiveX.
vKVMPreference
To remove an SP:
1. From the sidebar, click Targets - SPManagement, then click the Service Processors tab.
2. In the SP list, select the SP(s) you want to remove and click Delete.
Generic service processors
The appliance can provide access to a generic IPbased management console on any device or to
an unsupported SP. The device is manually added as an SPusing the generic profile.
NOTE: Credentials are not required to add a generic SP.
The appliance will perform a capability discovery to find a management console listening on
TCPport 22 (SSH), 23 (telnet), 80 (HTTP), 443 (HTTPS).
After the generic SPhas been added it will appear on the main Targets tab and the available
session buttons will be activated to the appropriate capabilities discovered on the device.