User Guide

44.....Avocent® Universal Management Gateway Appliance Installer/User Guide
2. Enter the IP address for the DSView™ server for authentication.
NOTE: This forwards all authentication requests to the DSView™ server.
User Target Access
After creating or modifying a user, click the username and then select the Target Access tab to
manage targets for that user. Managed targets are displayed in the column on the left. Available
targets are displayed in the column on the right. If a filter is applied, only the targets matching the
filter name will be displayed. If groups are defined, you can choose to display targets by group.
To add a managed target:
1. From the Available column, browse to the target(s) you want to manage and click the left
arrow to add it to the managed targets.
2. Click Apply.
To remove a managed target:
1. From the Managed Targets column, browse to the target(s)you want to remove and click the
right arrow to remove it from the managed targets.
2. Click Apply.
User Target Rights
After creating or modifying a user and assigning that user target access, select the username and
then click the Target Rights tab to manage target rights.
To manage target rights:
1. Under Managed Targets, click the target for which you want to manage rights.
2. Check the appropriate box to either allow or deny general access rights.
3. For serial targets, use the drop-down menu to select the session access and check the box
(es)to kill a multi-session or for multiple-session notification.
4. Click Apply.
Groups
User groups are given access and authorizations either by default or as assigned by an
administrator. Administrators can alter the permissions and access rights of users belonging to the
Power User or User groups or create additional groups with custom permissions and access rights.
Administrators can add, delete or modify permissions and access rights for users from any group at
any time.