User Guide

Initial Appliance Setup.....25
Order Service Action Use-case recommendation
12 srv-SNMP Accept
Only needed if centrally monitoring the appliance using a central SNMP
server.
13
srv-External-
syslog
Accept
Only needed if centrally logging the appliance using a central Syslog
server.
14
srv-SNMP-
Traps
Accept
Only needed if monitoring SNMP devices for the Trellis™ platform or
managing NetPDUs.
15
srv-Adobe-
Flex
Accept
Needed to access the appliance web UI, set to DROP to disable the web
UI.
16
srv-DSView-
proxy
Accept
Needed to access appliance targets with DSView™ software, set to
DROP to disable DSView™ software support.
17
srv-DSView-
plug-in
Accept
Needed to access/manage the appliance with DSView™ software, set to
DROP to disable DSView™ software support.
18
srv-Data-
logging-
DSView
Accept
Needed to monitor the appliance with the DSView™ software, set to
DROP to disable DSView™ software support.
19
srv-Discovery-
protocol
Accept
Needed to discover the appliance with the DSView™ software, set to
DROP to disable DSView™ software support.
20
srv-DRIP-
protocol
Accept
Needed on private ports to discover and manage UMIQ modules, set to
DROP to disable KVM support.
21
srv-Security-
protocol
Accept
Needed to access/manage the appliance with the DSView™ software,
set to DROP to disable DSView™ software support.
22
srv-PXE-boot-
server
Accept Not needed for current appliance features, set to DROP.
23
srv-Trellis-
Platform-OHS
Accept
Needed for Trellis™ platform software management and monitoring
support, set to DROP if not using Trellis™ platform software.
24
srv-Trellis-
Event
Accept
Needed for Trellis™ platform software management and monitoring
support, set to DROP if not using Trellis™ platform software.
25
srv-Trellis-
Event-2
DROP Don't change this default for any reason.
26
srv-UMG-
Service-1
DROP Don't change this default for any reason.
27
srv-UMG-
Service-1
DROP Don't change this default for any reason.
28
srv-UMG-
Service-2
Accept
Needed for Trellis™ platform software management and monitoring
support, set to DROP if not using Trellis™ platform software.
29
srv-UMG-
Service-4
Accept
Needed for Trellis™ platform software management and monitoring
support, set to DROP if not using Trellis™ platform software.
30
srv-UMG-
Service-5
Accept
Needed for Trellis™ platform software management and monitoring
support, set to DROP if not using Trellis™ platform software.
31
srv-UMG-
Service-6
Accept Set to DROP.
32
srv-UMG-
Service-7
Accept
Needed to support KVM sessions to UMIQ modules, set to DROP to
disable KVM support.
33
srv-UMG-
Accept
Needed to access the appliance web UI, set to DROP to disable the web