User Guide

Installation.....9
should be marked. Use a 3/16-inch drill bit to drill guide holes at the marked positions. Using
1/4 inch by 1 inch hex lag screws (not included with the wall-mounting kit), secure each
bracket to the plywood wall, using at least two screws for each bracket.
2. Remove the two middle truss-head screws from each side of the appliance. It is important to
remove only the middle two screws allowing the cover of the appliance to stay secured. Align
the holes in the appliance with the holes in the mounted brackets and, using the thumb screws
provided with the wall-mounting kit, secure it to the brackets with the slots facing up or down,
as illustrated.
Bracket Connections for Wall Mount Configuration
Wall and 0U mounting safety considerations
Wall mounting is permitted with an optional wall-mounting kit (sold separately). If wall mounting or
0U mounting in an equipment rack, the appliance must be mounted so that its front face is facing
sideways and not toward the floor or ceiling.
Cabling installation, maintenance and safety tips
WARNING: To avoid potentially fatal shock hazard and possible damage to equipment, please observe the
following precautions.