User Guide
Appendices.....135
Appendix K:SNMPConfiguration
An administrator can access the snmpd daemon on the appliance to add the appliance to an
environment as a monitored device.
To configure the appliance as a monitored device:
1. Connect to the console interface of the appliance using Putty.
2. Log in as admin.
3. From the presented menu, select shell.
4. Edit the snmpd.conf file which is located in the /etc/snmp folder.
5. Restart the snmpd deamon by typing /usr/bin/restartsnmpsvr.
6. You can now add the appliance to the desired monitoring tools.