User Guide

132.....Avocent® Universal Management Gateway Appliance Installer/User Guide
Appendix J:Firewall and NATConfiguration Scenarios
Firewall and NATscenario 1: Forwarding SNMPtraps from an SPto an external receiver.
Scenario 1 Diagram
Number Description
1 External trap receiver server/console
2 Appliance
3 Appliance firewall
4 Service processor
Scenario 1 Diagram Descriptions
To forward an SNMPtrap:
1. Add the SPto the appliance.
2. Configure the SPto send traps to an external receiver server.
Forwarding an SNMPTrap
3. On the appliance, from the sidebar of the Administration tab, click Firewall and NAT-
Interfaces to set up the firewall interfaces.