User Guide
112.....Avocent® Universal Management Gateway Appliance Installer/User Guide
• Rapidly opening and closing full-screen windows = 30-70 pkts/sec (avg. 2.5mbps download |
230kbps upload)
KVM window resolution 1024x768 @60hz (Ubuntu Desktop)
• Zero screen movement = 0 pkts/sec (avg. 1.3kbps download | 1.0kbps upload)
• Continuous mouse circles movement on screen = 30 pkts/sec (avg. 470kbps download |
245kbps upload)
• Rapidly opening and closing full-screen windows = 40-50 pkts/sec (avg. 750kbps download |
180kbps upload)
Serial Console
Available serial targets can be viewed under the Targets tab.
To view available serial targets:
1. From the sidebar, click Serial Console and then click on a target to view properties and logs.
2. Click Connect to open a serial session with the target.
3. Click Properties to view the target's properties.
4. Click Logs to view the target's log files. You can also download and clear log files from this
screen.
PDU
Each PDUand its associated outlets are listed under the Targets tab. From the sidebar, click a
PDU to view and/or modify its configuration settings. For read only information on the PDU, circuits
and outlets, view the following tabs: Properties, Outlets, Overview, Current, Voltage, Power
Consumption, Energy Consumption and Environment. To modify configuration of outlets, the PDU,
phases, circuits or environment, click the Settings tab.
Properties
From the Properties tab, you can view information about the PDU and power control all outlets as
well as upgrade the PDU's firwmare, reboot the PDU, reset the overcurrent protection, restore
factory defaults and access the browser UI.
To manage a PDU:
1. From the sidebar, click the PDU you want to manage to open its Information page.