User Guide

110.....Avocent® Universal Management Gateway Appliance Installer/User Guide
The correction time is the number of milliseconds the SP/server will wait before applying a
corrective "P"state or clock rate to reduce power consumption below the threshold. The sampling
period is how often in seconds the SP/server will query for current power consumption. The
exception action is the action the SP/server will take when a threshold is exceeded, and the options
will vary from server to server.
Sensors
Click on the Sensors tab to view the sensor information for the target device. Click Refresh to
refresh the sensors information.
Logs
Click the Logs tab to download the SOLdata buffering log or to clear all data log history.
The log files can be accessed or downloaded from the appliance shell in the /log directory.
Alert Destinations
Click the Alert Destinations tab to enable and configure SNMPalert destinations for the target
device. From this screen, you can change the community name and IP field for the alert.
NOTE: The screen options will vary depending on the capabilities of the SP.
UMIQ Modules
Available UMIQ modules can be viewed under the Targets tab. From the sidebar, click on a
UMIQmodule to view its settings. Click Connect to open a KVM session with the selected UMIQ
module.
To view available UMIQ modules:
1. From the sidebar, click UMIQand then click on a target to view its status and the power status.
2. Click Connect to open a KVMsession with the target.
KVM session optimization
The UMIQ module performs analog-to-digital video conversion, and the session quality will be
subject to cleanliness of the video signal coming from the server.
A poor quality session will exhibit blocky video and extremely slow mouse response.