User Guide

106.....Avocent® Universal Management Gateway Appliance Installer/User Guide
Status Value Description
In Use Session is active
Upgrading Session is upgrading
Power On One or more sockets are in the process of being turned on
Powering Off Target is shutting down
No Power No power is detected
Partial Power Target has sockets in both on and off states
Locked Off One or more sockets are locked in the off position
Powered Off One or more sockets are turned off
Locked On One or more sockets are locked in the on position
Idle No sessions are active
Powered On Sockets are turned on
Unknown No status available
Status Descriptions
NOTE: If a filter is applied, only those matching targets will be displayed.
Service Processors
Available service processors and their associated target devices can be viewed under the Targets
tab. From the sidebar, click on a service processor to view and/or modify its configuration settings.
Properties
Click the Properties tab to view general information and the FRU information for a service
processor.
System
From the system tab you may view the power status and the status of the indicator LED (if
available) on managed target devices, manage power, turn the LED on and off remotely and view
and control the time setting.
To view and control the power status:
1. Click an SP name.
2. Click the System tab. The system information window appears and displays the current power
status of the target device.
3. From the drop-down list, select the desired power action.
4. Click Apply.